Hi Greg, I believe it uses the uClinux-dist. The reason i am not sure is the source was provided by a company called ADI for their Pronghorn-Metro box. It uses uClinux libc. The version of kernel is: 2.6.17
Regards, srikanth chavali On 5/10/07, Greg Ungerer <[EMAIL PROTECTED]> wrote:
Hi Srikanthn Srikanth Chavali wrote: > I compiled (2.6.x kernel) and loaded the zImage and ramdisk.gz on my > board with IXP425. The board seems to be in the process of loading the > kernel when it stops after the messages shown below. Are you using the uClinux-dist, or something else? If yes, what version? Regards Greg > I googled and found people facing similar issues. I ensured that i had > CONFIG_FPE_NWFPE=y and CONFIG_FPE_FASTFPE is not set in my kernel configs. > > Any help would be greatly appreciated. > > Regards, > > srikanth chavali > > Attached are the messages: > > Intel/Sharp Extended Query Table at 0x010A > Intel/Sharp Extended Query Table at 0x010A > Intel/Sharp Extended Query Table at 0x010A > Intel/Sharp Extended Query Table at 0x010A > Using buffer write method > cfi_cmdset_0001: Erase suspend on write enabled > Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0xfe0000 > 3 RedBoot partitions found on MTD device IXP4XX-Flash.0 > Creating 3 MTD partitions on "IXP4XX-Flash.0": > 0x00000000-0x00060000 : "RedBoot" > 0x00fe0000-0x00fff000 : "FIS directory" > mtd: partition "FIS directory" doesn't end on an erase block -- force > read-only > 0x00fff000-0x01000000 : "RedBoot config" > mtd: partition "RedBoot config" doesn't start on an erase block boundary > -- forc > e read-only > mice: PS/2 mouse device common for all mice > i2c /dev entries driver > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > RAMDISK: Compressed image found at block 0 > VFS: Mounted root (ext2 filesystem) readonly. > Freeing init memory: 96K <------------------------------------------ > Nothing seems to happen after this > although it does'nt look like the system is frozen. > > -- > srikanth chavali > > > ------------------------------------------------------------------------ > > _______________________________________________ > uClinux-dev mailing list > [email protected] > http://mailman.uclinux.org/mailman/listinfo/uclinux-dev > This message was resent by [email protected] > To unsubscribe see: > http://mailman.uclinux.org/mailman/options/uclinux-dev -- ------------------------------------------------------------------------ Greg Ungerer -- Chief Software Dude EMAIL: [EMAIL PROTECTED] Secure Computing Corporation PHONE: +61 7 3435 2888 825 Stanley St, FAX: +61 7 3891 3630 Woolloongabba, QLD, 4102, Australia WEB: http://www.SnapGear.com _______________________________________________ uClinux-dev mailing list [email protected] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [email protected] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
-- srikanth chavali
_______________________________________________ uClinux-dev mailing list [email protected] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [email protected] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
