Hi Greg,
Just figured out that ADI Engineering is using uClinux-dist.
srikanth chavali
On 5/10/07, Greg Ungerer <[EMAIL PROTECTED]> wrote:
Hi Srikanthn
Srikanth Chavali wrote:
> I compiled (2.6.x kernel) and loaded the zImage and ramdisk.gz on my
> board with IXP425. The board seems to be in the process of loading the
> kernel when it stops after the messages shown below.
Are you using the uClinux-dist, or something else?
If yes, what version?
Regards
Greg
> I googled and found people facing similar issues. I ensured that i had
> CONFIG_FPE_NWFPE=y and CONFIG_FPE_FASTFPE is not set in my kernel
configs.
>
> Any help would be greatly appreciated.
>
> Regards,
>
> srikanth chavali
>
> Attached are the messages:
>
> Intel/Sharp Extended Query Table at 0x010A
> Intel/Sharp Extended Query Table at 0x010A
> Intel/Sharp Extended Query Table at 0x010A
> Intel/Sharp Extended Query Table at 0x010A
> Using buffer write method
> cfi_cmdset_0001: Erase suspend on write enabled
> Searching for RedBoot partition table in IXP4XX-Flash.0 at offset
0xfe0000
> 3 RedBoot partitions found on MTD device IXP4XX-Flash.0
> Creating 3 MTD partitions on "IXP4XX-Flash.0":
> 0x00000000-0x00060000 : "RedBoot"
> 0x00fe0000-0x00fff000 : "FIS directory"
> mtd: partition "FIS directory" doesn't end on an erase block -- force
> read-only
> 0x00fff000-0x01000000 : "RedBoot config"
> mtd: partition "RedBoot config" doesn't start on an erase block boundary
> -- forc
> e read-only
> mice: PS/2 mouse device common for all mice
> i2c /dev entries driver
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> RAMDISK: Compressed image found at block 0
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing init memory: 96K <------------------------------------------
> Nothing seems to happen after this
> although it does'nt look like the system is frozen.
>
> --
> srikanth chavali
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> uClinux-dev mailing list
> [email protected]
> http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> This message was resent by [email protected]
> To unsubscribe see:
> http://mailman.uclinux.org/mailman/options/uclinux-dev
--
------------------------------------------------------------------------
Greg Ungerer -- Chief Software Dude EMAIL: [EMAIL PROTECTED]
Secure Computing Corporation PHONE: +61 7 3435 2888
825 Stanley St, FAX: +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia WEB: http://www.SnapGear.com
_______________________________________________
uClinux-dev mailing list
[email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
--
srikanth chavali
_______________________________________________
uClinux-dev mailing list
[email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
