Hi Paul, I believe this is faulty / incorrect RAM when I've seen this before was when trying to use non 'cisco supplied' RAM in an ASA.
Thanks, On 20 Jun 2012, at 10:36, Paul Mansfield wrote: > Thanks for taking the time to read this > > I have a Cisco ASA5505 running 8.2.5 (insufficient RAM for 8.3 or 8.4). > > If I power cycle it starts up just fine. If I "reload" and watch the > serial port it says rebooting and goes into error mode - all LEDS on > front and each port flash repeatedly. > > I've tried reverting to an older ASA image - 8.2.1 - and it exhibited > the same problem. > > > I've be grateful if anyone can suggest why this happens? > > > > __ > Scanned by the Metronet-UK Ltd
