Hi Paul,
As a main router I am using Mikrotik CCR1036-12G-4S, BGP with full
tables, two esxi servers connected to it directly and few other servers,
also company network and few gigabit microwave links, one to my home so
I can work remotely
. Over the microwave links I can achieve full speed for both upload and
download (inside my network) using iperf3. I can also utilize full
upload. But same with download. To be honest I have 1Gb leased line in
different location from different carrier and I do not have such problem
with bandwidth speed. I am really surprised as I just did an upgrade
from 500Mbit to 1Gb.
Regards,
Wojciech
Paul Bone wrote on 28/05/2020 15:54:
Hi,
Have you tried using UDP over TCP on iperf?
This could also be caused by the device you are using unable to
process the speeds - have you tried a back to back iperf test directly
between two devices before putting them over the leased line?
Paul
On Thu, 28 May 2020 at 15:46, Wojciech Lesiak
<[email protected] <mailto:[email protected]>> wrote:
Hi all,
I have 1Gb lease line from BT Net and I have an issue with
download speed for one thread download, I can't achieve more than
500Mbit over it, but upload with one thread is going full speed.
To do my test I am using iperf3 also perfsonar with same results.
I have reported it as a fault but they said if I want to utilize
full speed I have to use multi thread download. I do not believe
that is right. What can I do about it?
Regards,
Wojciech Lesiak
--
Sent from Postbox <https://www.postbox-inc.com>
--
Paul Bone
Network Consultant
PMB Technology
--
Sent from Postbox <https://www.postbox-inc.com>
