Hi,
I've never used queue to rate-limit download.Line has been upgraded both ways because with 10 parallel downloads, I can max out line to 960Mbit.

Regards,

Wojciech

Paul Bone wrote on 28/05/2020 16:32:
Hi Wojciech,

That sounds suspiciously like the 500M to 1G upgrade has only been configured in one direction to me. I have seen this done many times - some providers more frequently than others.

The CCR will happily pass that traffic all day, but does it have a queue configured to rate-limit the download?

Paul

On Thu, 28 May 2020 at 16:16, Wojciech Lesiak <[email protected] <mailto:[email protected]>> wrote:

    Hi Paul,

    As a main router I am using Mikrotik CCR1036-12G-4S, BGP with full
    tables, two esxi servers connected to it directly and few other
    servers, also company network and few gigabit microwave links, one
    to my home so I can work remotely
    .  Over the microwave links I can achieve full speed for both
    upload and download (inside my network) using iperf3. I can also
    utilize full upload. But same with download. To be honest I have
    1Gb leased line in different location from different carrier and I
    do not have such problem with bandwidth speed. I am really
    surprised as I just did an upgrade from 500Mbit to 1Gb.

    Regards,

    Wojciech



    Paul Bone wrote on 28/05/2020 15:54:
    Hi,

    Have you tried using UDP over TCP on iperf?

    This could also be caused by the device you are using unable to
    process the speeds - have you tried a back to back iperf test
    directly between two devices before putting them over the leased
    line?

    Paul

    On Thu, 28 May 2020 at 15:46, Wojciech Lesiak
    <[email protected] <mailto:[email protected]>> wrote:

        Hi all,

        I have 1Gb lease line from BT Net and I have an issue with
        download speed for one thread download, I can't achieve more
        than 500Mbit over it, but upload with one thread is going
        full speed. To do my test I am using iperf3 also perfsonar
        with same results. I have reported it as a fault but they
        said if I want to utilize full speed I have to use multi
        thread download. I do not believe that is right. What can I
        do about it?

        Regards,

        Wojciech Lesiak

-- Sent from Postbox <https://www.postbox-inc.com>



-- Paul Bone
    Network Consultant

    PMB Technology

-- Sent from Postbox <https://www.postbox-inc.com>



--
Paul Bone
Network Consultant

PMB Technology

--
Sent from Postbox <https://www.postbox-inc.com>

Reply via email to