now this is getting interesting, about 2 times of 10 it works just fine as it should.
is there anything I can do to make /etc/master and /etc/udhcpc-script work more secure? should I put sleep commands in there or something? Anders -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nyström Anders Sent: 10. huhtikuuta 2008 15:06 To: unattended-info Subject: Re: [Unattended] Last cvs .... computer freezes ... hello I had a similar situation unattended-4.8 new e1000 driver nt5x-install (automatically in the meta section) make download and make all works fine PXE boot goes alright until 0000:00:19.0 :eth0 Unable to allocate MSI Interrupt Error -1 Sending Discover 0000:00:19.0 :eth0: Link is up 100 Mbps Full Duplex Flow Control: RX/TX Sending Discover there it stop after waiting an hour I Ctrl+C and tried /etc/master manually voi´la - the installation went through, without problems my question about this little workaround is, what could be done after the Sending Discover text to restart the master script or retry the udhcpd command Anders -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Regis Gras Sent: 4. huhtikuuta 2008 18:21 To: Nils Olav Fossum; unattended-info Subject: [Unattended] Last cvs .... computer freezes ... In all the mails on the unattended list I saw - driver e1000e is integrated in the cvs - nt5x-install is integrated in the cvs. Very good news ... - I used the same glibc as this on my computer (glibc-2.3.6) - I used too samba-3.0.20 and perl-5.8.8 Make download. OK Make tftpboot OK So, I tried to boot an Dell Optiplex 755 with PXE, and I saw this messages: ................... *** Now that we have loaded the modules (maybe) let's try DHCP ... *** Trying DHCP on eth0 udhcpc (v1.9.2) started 0000:00:19.0 :eth0 Unable to allocate MSI Interrupt Error -1 Sending Discover 0000:00:19.0 :eth0: Link is up 100 Mbps Full Duplex Flow Control: RX/TX 0000:00:19.0 :eth0: 10/100 speed: disabling TSO and now, the computer freezes. I used: linux-2.6.24.4 glibc-2.3.6 perl-5.8.8 ....... I'll try with linux-2.6.24.3 Régis -- ================================================================== | Régis Gras | http://dcm.ujf-grenoble.fr | | D.C.M. | mailto:[EMAIL PROTECTED] | | 301, rue de la chimie | -------------- | | DU BP 53 | Tel 04 76 51 41 76 | | 38041 Grenoble Cedex 9 | Fax 04 76 51 40 89 | ================================================================== ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
