Hi: Tom Where in fl? I have a 42 that had a bow roller that folded out when you needed to use. I got rid of that and put a wood bow pulpit with anchor roller etc, I will look around and see if i still have that roller. GP
On Mar 26, 9:05 pm, tomdepot <[email protected]> wrote: > Has anyone installed a bow/anchor roller on a 31' express cruiser? In > order to keep the anchor (22# delta) from hitting the bow, I have to > extend the roller out past the bow pretty far. I have a nice piece of > 3/4" starboard to use to support the roller, but I still have to > cantilever out past the bow a good ways. What concerns me is the > torque that will be exerted on the bow deck, even with the largest > backing plate I can get under there. Have decks failed as a result of > this setup? It looks as though my roller for the anchor will be about > as far past the bow as the bolts are behind it. The fiberglass seems > pretty solid in this area, about 1/4" thick, but I would sure like > some experienced advice on this. > > Thanks, > Tom in Florida --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/UnifliteWorld?hl=en -~----------~----~----~----~------~----~------~--~---
