i have a powewr winch on a 27"sportfisher the anchor line retieves fine but the quick release doesnt i have to yank the line out of the rope locker . any ideas i pulled the side cover a squirted wd-40???
-----Original Message----- From: [email protected] [mailto:[email protected]]on Behalf Of Kerry Lebel Sent: Wednesday, May 06, 2009 12:48 AM To: [email protected] Subject: [UnifliteWorld] Slipping Windlass Hey All, I found out the hard way this weekend that my windlass is slipping. It is the first time I have anchored out since I bought the boat a little over a month ago. I had 75ft of chain out and have a 45lb CQR anchor on her. I had to pull it up by hand. Ugh. It's a 42ft ACMY with a Ideal vertical windlass on it that I assume is stock. I think the clutches are slipping. I checked out the Ideal Windlass website and they had a FAQ. They mentioned a Capstan Wrench for trying to tighten the clutches. The top of the Capstan on my windlass has two small offset holes off center. Not a nut or something you might typically see. Can someone tell me what kind of tool I might need to tighten it? And if I tighten it and it still slips does anyone know a place where I can get the clutches replaced? We are headed to the San Juans at the end of June and were planning on swinging from the hook the majority of the time. No way am I doing that without a windlass! :) http://www.idealwindlass.com/images/linechain.jpg Thanks, Kerry --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/UnifliteWorld?hl=en -~----------~----~----~----~------~----~------~--~---
<<inline: image001.jpg>>
