write or call with any suggestions. Thanks 602-432-3383 What is the size of the boat? Was it making MORE noise before this incident? The Uniflite exhaust system on the 42, and 48 ft vessels IS originally setup correctly. Possibly it has been modified see if your muffler looks similar to this.
http://www.nauticatusa.com/tips/cw_muffler.aspx or http://www.powerandmotoryacht.com/columns/maintenanceqa/0102qa/ The original mufflers sit above the waterline. I had to have the cooling flap re - welded on the port one. For cryin out loud KEEP spinning the engine! I had 3 valves stick, and they are still stuck. I put a piece of rope on top of the piston, and hand crank the valves up after tapping them down. I am using any kind of magic oil I can come up with. I just do not want to remove the head. I know I will end up doing that anyway. It is such a shame as there is less than 25 Hours on it. Hmmm in Alaska with your Arizona phone. O.K. Hey If you have a camera maybe snap a pic. Apparently the town has a computer. I took a look at your profile in an attempt to see what you are driving. Nobody bothers, but it could have been a help. Give me a call if you think I can help. 714 626 6056 Hang in there, and good luck. Michael --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/UnifliteWorld?hl=en -~----------~----~----~----~------~----~------~--~---
