I concur with Jim..pretty close to what I was burning around 10kts. Monty From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: November-10-09 11:06 AM To: [email protected] Subject: [UnifliteWorld] Re: more knots
I had a fuel cosumption chart from J&T a year or so ago that I had given to Capt.Perry It was for N 80 injectors on a 671N. When fuel was at 4.25 a gallon i only ran at 10 kts and fuel consumption from that chart was 3GPH each engine at 1200 RPM. If you run at 1800 RPM it goes way up to double digits each. You mat try to contact Johnson and Towers to get the power curve chart if Capt Perry does not have it. Jim -------------- Original message from Russell Davignon <[email protected]>: -------------- > Monty I am looking at 46' Uni with twin 671 Turbos ( wish they were naturals > but....) What kind of fuel consumption do you get at 10 knot cruise????. Any > idea what there babies will eat in fuel at 10 knots. I'm not interested in > faster than 10 and am interested in keeping $$$$ down. Thanks Russ > > "I only dressed his wounds, God healed them." > > Ambrose Pare, French Military Surgeon 1510-1590 > > > > ----- Original Message ---- > From: Monty Montaine > To: "[email protected]" > Sent: Mon, November 9, 2009 4:04:00 PM > Subject: [UnifliteWorld] Re: more knots > > I miss read your previous link..well I don't really have any advise on > repowering a boat, I have no experience on that kind of project. > I have two Detroit 671's and I really like them. > > -----Original Message----- From: [email protected] > [mailto:[email protected]] On > Behalf Of Jeff > Sent: November-09-09 12:39 PM > To: [email protected] > Subject: [UnifliteWorld] Re: more knots > > > Hi Monty, > > I am getting 18 dollars at 9 knots.But can only run at 12 knots tops.Hmmmmm > > Would have any advice for me > > jeff > > > > > ----- Original Message ----- > From: "Monty Montaine" > To: > Sent: Monday, November 09, 2009 1:33 PM > Subject: [UnifliteWorld] Re: more knots > > > > Wow, nice. > I have a 42 MYDC with 671's and I figured, a rough approximation, somewhere > around 100.00 an hour at .16 to .18 knots. > Around 50 at 10 knots...close to that I think. > Monty > > -----Original Message----- > From: [email protected] [mailto:[email protected]] > On Behalf Of JC > Sent: November-09-09 12:29 PM > To: UnifliteWorld > Subject: [UnifliteWorld] more knots > > > Hi all, > > I have been following alot of postings here regarding refitting 36' > Aft cabins and have seen diesel engines installed and running at 18 > knots or more.I have twin 3208 Cats running very well and about 18 > dollars per hour cost.(cnd) Would anyone have any info for me. > > Thanks > > Jeff > > > > > > > > > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en -~----------~----~----~----~------~----~------~--~---
