I have a 36DC and from the time I bought it 13 years ago, it had zincs on the 4 places (stern, shafts, rudders and trim tabs). I'm pretty sure that is the norm.
The plate on the stern is about 6inches (tall) by 12inches (wide). Costs about $40 dollars. 6" round zincs on the rudders and trim tabs. 1 on each. 2 ball zincs on each 1 1/4" diameter drive shaft. On Mar 8, 8:39 pm, sonofstrat <[email protected]> wrote: > For the Uniflite boaters, what do you think about zincs on the trim > tabs, rudders and shafts by the cutlass bearings as I saw a 45 foot > Hatteras with just about every zinc you could imagine. Just want some > feedback as I know from talking with other owners the zinc grounding > does not seem to be a problem with these boats and also what size of > plate should be bolted to the stern on a 34 foot sport sedan as there > is no info in my manual and someone out there should have an answer > before I launch this boat. > > Roger -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en.
