Hi Kerry, Thank you so much for the update.Toby. --- On Fri, 5/7/10, Kerry Lebel <[email protected]> wrote:
From: Kerry Lebel <[email protected]> Subject: Re: [UnifliteWorld] Re: Flybridge on my 38ft uniflite To: [email protected] Date: Friday, May 7, 2010, 8:59 AM I don't know about the 38 but on my 42, up on the fly bridge toward the port side there is a big cut out for where they lift the engines in and out. Over that is aluminum framing that is screwed to the deck. I had a very similar leak and it turned out the caulking had come apart and water was getting under the aluminum framing and through the crack where the caulk came apart. It took me forever to find. I pulled all the aluminum framing off, used a heat gun to get rid of all the old crap and then re-caulked the whole thing. Haven't had a leak since. Kerry On Fri, May 7, 2010 at 4:16 AM, GP <[email protected]> wrote: Toby: Try sealing all the screws. I know that has always been a problem with leaks. GP On Apr 27, 5:32 pm, Toby <[email protected]> wrote: > Hi,I am having a problem with a samall leak coming through the ceiling > of the boat in the front room .I cant find any cracks top side.I would > like to know if there is a good sealer out there?I did put a truck bed > liner (liquid ) on the flybridge floor.I would like to find something > to seal it without taking the stuff off thats on there already.Toby > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group > athttp://groups.google.com/group/unifliteworld?hl=en. -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en. -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en. -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en.
