Kerry: Sorry for the delay in responding. It will take more than few beers as I am about 30 miles north of Boston.
The windows should slide on a piece of plastic with felt on either side of the channel. The channels have small screws through the bottom that hold them in place. To access the screws, you need to move both windows to one side and remove what is left of the plastic from the bottom of the channel in the open area. There may be some felt in the bottom underneath the plastic strip, but I do not recall. You should find one or two screw heads which will need to be removed. Then, move both pieces of glass to the area you just cleaned out and follow the same process on that end. Once you have all of the screws removed, you can pull the channel or track outward, being careful as you will be holding the weight of the two pieces of glass. On Sunday, July 10, 2016 at 11:40:42 PM UTC-4, Kerry wrote: > Hi all! Been quiet in here lately! I joined the Unflite Facebook group > as well but not much activity there either. My windows are to the point > that I am the only one in my family that can open them. The channels need > new felt BAD. Has anyone rebuilt their windows? How hard is it to take > them apart and rebuild? Ive Google’s the heck out of it with no luck. > > Thanks! > > Kerry -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/unifliteworld. For more options, visit https://groups.google.com/d/optout.
