It seems that I have the MCE version of the card since I do have a radio tuner and I have no remote. See
http://www.mythtv.org/wiki/index.php/Hauppauge_PVR-150 "The card called a PVR-150 MCE (pictured) does not contain a connection for a remote receiver, but it adds support for FM radio tuner and composite video. Older revisions of the card, typically called PVR-150, were sold with a remote and remote receiver, but lack the FM tuner and composite video inputs." The tv tuner works very well with ubuntu, no need to install drivers or anything. The image quality is great imho. I haven't played with radio much, and in fact the dmesg says something suspicious: [ 42.945451] ivtv: Start initialization, version 1.1.0 [ 42.945501] ivtv0: Initializing card #0 [ 42.945502] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 43.002316] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 19 [ 43.058292] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4F11 [ 43.058308] usbcore: registered new interface driver usblp [ 43.117038] tveeprom 0-0050: The eeprom says no radio is present, but the tuner type [ 43.117040] tveeprom 0-0050: indicates otherwise. I will assume that radio is present. [ 43.117042] tveeprom 0-0050: Hauppauge model 26559, rev C260, serial# 8211793 [ 43.117044] tveeprom 0-0050: tuner model is LG S001D MK3 (idx 60, type 38) [ 43.117046] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [ 43.117048] tveeprom 0-0050: audio processor is CX25843 (idx 37) [ 43.117049] tveeprom 0-0050: decoder processor is CX25843 (idx 30) [ 43.117051] tveeprom 0-0050: has radio, has no IR receiver, has no IR transmitter [ 43.117053] ivtv0: Autodetected Hauppauge WinTV PVR-150 [ 43.221262] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) [ 43.221280] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 43.221281] tuner 0-0043: type set to tda9887 [ 43.225369] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 43.310618] cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) [ 43.343147] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 43.356870] tuner-simple 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 43.356873] tuner 0-0061: type set to Philips PAL/SECAM m [ 43.357025] ivtv0: Registered device video0 for encoder MPG (4096 kB) [ 43.357037] ivtv0: Registered device video32 for encoder YUV (2048 kB) [ 43.357049] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) [ 43.357060] ivtv0: Registered device video24 for encoder PCM (320 kB) [ 43.357071] ivtv0: Registered device radio0 for encoder radio [ 43.357072] ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 [ 43.357081] ivtv: End initialization Thanks! Marko 2008/11/10 bpa <[EMAIL PROTECTED]>: > > The Linux drivers (IVTV) has a wikipage ( > http://ivtvdriver.org/index.php/Main_Page ) and the PVR 150 is on the > page so there is no problem about PVR-150 working on Linux. > > However, from the spec sheet ( > http://www.hauppauge.com/site/products/data_pvr150.html ) I don't see > a Radio tuner on the PVR-150 card ? For example, there is an FM tuner > on the PVR-350 > > What s/w are you using with the PVR-150 ? > Are you sure it supports radio ? > > > -- > bpa > ------------------------------------------------------------------------ > bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 > View this thread: http://forums.slimdevices.com/showthread.php?t=54845 > > _______________________________________________ > unix mailing list > [email protected] > http://lists.slimdevices.com/lists/listinfo/unix > _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/unix
