Triode wrote: > Glad its working for you - it seems to get framebuffer and console input > you really need to start it from logging in on that tty. It really > needs to be run as the default shell for that tty in place of the login > prompt. (not got to looking at that yet) > > The new HD skin is intended to be 1920x1080 as this is what wandboard > supports for the hdmi connect (it seems to have problems with smaller > resolutions). The Joggler skin should work at 800x480. > > Can you confirm what size display you have and on what device? (I run > it on a PI last night and it needed overscan turning off on the PI > /boot/config.txt configuration to get a 1920x1080 display). Other than > that it worked quite well on a PI, but it did eat most of the cpu when > scrolling (blitting 1920x1080 seems to use a lot of cpu if all done in > software which is what I believe it to be doing) > > Re applet installer - yes I plan to add some applets and make it > possible to install additional applets. Note that I've changed some of > the code so applets may need tweeking to run.... The intention was that > previous applets would run with relatively minor tweeks if they didn't > rely on bits I've removed though.... > > Its work in progress but any reports of oddities in the HD skin > appreciated.
Great to know that you are planning to add the option to add additional applets! My raspberry PI is hooked to a Sony Bravia 40" and my current resolution is 1920x1080 @ 50Hz, interlaced and I have no overscan issues...but when I run jivelite the jivelite windows is too big...any suggestions? Thanks a lot! ------------------------------------------------------------------------ albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=98156 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
