albertone74 wrote: > That did the trick Triode! The problem was with the ssh session. Indeed > I run jivelite normally using the console with a bluetooth keyboard and > everything is now up and running. I was getting nuts as jivelite was > working well on my server running ubuntu but to be honest when I tried > jivelite on the server I used the normal console/keyboard and when I > tried jivelite on my raspberry pi I used the ssh session..that's why! > Can I raise the following two points: > > 1. Would it be possible to implement the Applet Installer under > Settings/Advanced? > 2. When jivelite starts up the image on my HDMI TV is too big. Would it > be possible to make it fit the TV screen automatically? > > Thanks a lot!!!
Glad its working for you - it seems to get framebuffer and console input you really need to start it from logging in on that tty. It really needs to be run as the default shell for that tty in place of the login prompt. (not got to looking at that yet) The new HD skin is intended to be 1920x1080 as this is what wandboard supports for the hdmi connect (it seems to have problems with smaller resolutions). The Joggler skin should work at 800x480. Can you confirm what size display you have and on what device? (I run it on a PI last night and it needed overscan turning off on the PI /boot/config.txt configuration to get a 1920x1080 display). Other than that it worked quite well on a PI, but it did eat most of the cpu when scrolling (blitting 1920x1080 seemd to use a lot of cpu if all done in software which is what I believe it to be doing) ------------------------------------------------------------------------ Triode's Profile: http://forums.slimdevices.com/member.php?userid=17 View this thread: http://forums.slimdevices.com/showthread.php?t=98156 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
