JackOfAll wrote: > > > The imx fb is no longer a stand-alone module and looks like it wont be > created/initialized without a hdmi device being plugged in, which is a > PITA from a jivelite running as a service, point of view. Also, I don't > believe the hdmi audio device will be created without a hdmi device > being detected. (Looks like there is a bunch of initialisation code, > that parses ELD for supported sample rates, from the actual plugged-in > device, but I've not really looked too closely.) > > Questions are.... With a hdmi device being plugged in from boot..... > > 1. Video still works? > 2. Does it work any better than it did before, vis-a-vis EDID detection > code. (ISTR you had to set params on kernel cmd line.) > 3. Does /dev/fb0 get created? > 4. Do you get a hdmi audio device listed? (aplay -l) > 5. Does the hdmi audio device actually work? ;) > > PS. If you do try running, don't forget to correct the dtb entry in > /boot/extlinux/extlinux.conf before you run it. The dtb file has > definitely changed 3.13.x -> 3.14.0.rcx).
I used a Wandboard QUAD for this experiment, which prior to the update was working with HDMI on 3.13.5-200.1.cs.fc20.armv7hl. The answer to all 5 questions is "no". I left my mode setting kernel command line as it was. Had the video worked at all, I would have removed it, but it didn't. I am back on 3.13.5-200.1.cs.fc20.armv7hl now. If there is something else I should try, please let me know. Best regards, Charles. ---------------------- "Dreamer, easy in the chair that really fits you..." ------------------------------------------------------------------------ dsdreamer's Profile: http://forums.slimdevices.com/member.php?userid=12588 View this thread: http://forums.slimdevices.com/showthread.php?t=99395 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
