ab.wagener wrote: > Hi Clive, > > I tested the kernel and for the first time a HDMI device was visible. > fbset shows the correct geometry of the attached screen, but all timings > are set to null. > The hdmi audio device is also present. My physical screen has two dhmi > inputs. If I switch the screen to the wandboard , I get the error > message : > > Input Signal Out of Range > > and I'm not able to switch back to my pc-system. I have to ssh from my > notebook, shutdown the wandboard, the I have access to my pc again. > Also : half succes, but not complete. > > Bernd
I tried this kernel and display came on showing a login prompt (I have Jivelite disabled atm). The resolution was 1024x768 with no kernel parametes, although the max resolution support is 1920x1080p. I can force the resolution to via a video= line to match the monitor. I have been messing around trying to get sound out and did briefly succeed, but with a speed-up effect. It might have been trying to sample 44.1 at 48kHz, but it was defnitely playing too fast. I haven't been able to isolate why I sometimes get sound and other times get silence when attempting to play from squeezelite. I examined the content of cat /proc/asound/card2/pcm0p/sub0/status, which is the card corresponding to DWHDMI and I could see that the interface was running and the pointers were advancing as expected, even when no sound audible. ---------------------- "Dreamer, easy in the chair that really fits you..." ------------------------------------------------------------------------ dsdreamer's Profile: http://forums.slimdevices.com/member.php?userid=12588 View this thread: http://forums.slimdevices.com/showthread.php?t=99395 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
