scrarfussi wrote: > > so i had to recompile the kernel > adding > csos0001-as-patch1-sgtl5000.patch > csos0004-rssi.patch > csos0005_1-spdif-IEC958-AES-status.patch > csos0005_2-as-patch4-spdif-pll4.patch > csos0005_3-mxc_spdif-validity-flag.patch > csos0005_4-mxc_spdif-debug.patch > csos0007-rtc.patch >
Hmmm. Arch is using the 3.0.35 kernel. (Thought it would be mainline.) Anyway, this may be of help to anyone who does want to build there own kernel. I've uploaded the last cm77 build of the CS supplied kernel, 'kernel-wand-3.0.35-cm77.fc19.src.rpm' (http://www.vacuumtube.org.uk/SoA/kernel-wand-3.0.35-cm77.fc19.src.rpm). The kernel config used to build it, 'config-arm-wandboard' (http://www.vacuumtube.org.uk/SoA/config-arm-wandboard). Patches. (These you want to apply, if building your own kernel.) 'csos0001-as-patch1-sgtl5000.patch' (http://www.vacuumtube.org.uk/SoA/csos0001-as-patch1-sgtl5000.patch) A patch that resolved the issue where the sgtl5000 audio device was not being initialised at startup due to i2c timing out. 'csos0002-as-patch2-usb-mixer.patch' (http://www.vacuumtube.org.uk/SoA/csos0002-as-patch2-usb-mixer.patch) Reduce debug logging for USB audio mixer. 'csos0003-as-patch3-hdmi-debug.patch' (http://www.vacuumtube.org.uk/SoA/csos0003-as-patch3-hdmi-debug.patch) Verbose logging for HDMI EDID. 'csos0004-rssi.patch' (http://www.vacuumtube.org.uk/SoA/csos0004-rssi.patch) Backport of a patch to stop "garbage" logging from the Broadcom FMAC wi-fi driver. 'csos0005_1-spdif-IEC958-AES-status.patch' (http://www.vacuumtube.org.uk/SoA/csos0005_1-spdif-IEC958-AES-status.patch) 'csos0005_2-as-patch4-spdif-pll4.patch' (http://www.vacuumtube.org.uk/SoA/csos0005_2-as-patch4-spdif-pll4.patch) 'csos0005_3-mxc_spdif-validity-flag.patch' (http://www.vacuumtube.org.uk/SoA/csos0005_3-mxc_spdif-validity-flag.patch) 'csos0005_4-mxc_spdif-debug.patch' (http://www.vacuumtube.org.uk/SoA/csos0005_4-mxc_spdif-debug.patch) SPDIF audio patch set. (Use pll4 clock for sample rate up to 192k. "Fix" validity flag.) 'csos0007-rtc.patch' (http://www.vacuumtube.org.uk/SoA/csos0007-rtc.patch) Enable rtc clock. (About as much use as a chocolate teapot without battery backup, but anyway.) 'csos0008-ALSA_usb-audio_add_a_workaround_for_the_NuForce_UDH-100.patch' (http://www.vacuumtube.org.uk/SoA/csos0008-ALSA_usb-audio_add_a_workaround_for_the_NuForce_UDH-100.patch) 'csos0010-ALSA_usb-audio_increase_control_transfer_timeout.patch' (http://www.vacuumtube.org.uk/SoA/csos0010-ALSA_usb-audio_increase_control_transfer_timeout.patch) 'csos0011-ALSA_usb_Work_around_CM6631_sample_rate_change_bug.patch' (http://www.vacuumtube.org.uk/SoA/csos0011-ALSA_usb_Work_around_CM6631_sample_rate_change_bug.patch) USB audio patch set. (If you're using a CM6631 device you definitely want to apply these! ;)) Don't apply the following patches. (Won't do any harm if you do, but pointless. This has to do with the backport of the I2S driver from mainline. Which I aborted. But for completeless, the patches were included in the last CS rpm, so.....) 'csos1001-sound-soc-codec-ess9018.patch' (http://www.vacuumtube.org.uk/SoA/csos1001-sound-soc-codec-ess9018.patch) 'csos1002-sound-soc-codec-tda1541a.patch' (http://www.vacuumtube.org.uk/SoA/csos1002-sound-soc-codec-tda1541a.patch) ------------------------------------------------------------------------ JackOfAll's Profile: http://forums.slimdevices.com/member.php?userid=3069 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
