ctbarker32 wrote:
> I appreciate you responding. If you could, would you run "cat
> /proc/asound/card0/stream0" from an ssh shell and post the results
> here?
>
With dwc_otg.speed=1 I can only output 41.1kHz and 48kHz. But with the
default value it runs with up to 192kHz.
Code:
--------------------
tc@piCorePlayer:~$ cat /proc/asound/card0/stream0
Emotiva Audio Inc XMC-1 at usb-bcm2708_usb-1.3, high speed : USB Audio
Playback:
Status: Running
Interface = 1
Altset = 2
Packet Size = 95
Momentary freq = 96000 Hz (0xc.0000)
Feedback Format = 16.16
Interface 1
Altset 1
Format: S16_LE
Channels: 2
Endpoint: 5 OUT (ASYNC)
Rates: 44100, 48000, 88200, 96000, 176400, 192000
Data packet interval: 125 us
Interface 1
Altset 2
Format: S24_3LE
Channels: 2
Endpoint: 5 OUT (ASYNC)
Rates: 44100, 48000, 88200, 96000, 176400, 192000
Data packet interval: 125 us
--------------------
It runs on Interface 1 and Altset 2 (24b). I don't know what "Feedback
Format = 16.16" means. I can also force "24_3" format on the -a comand
without an error. The log file of squeezelite showed the correct format,
too. But I did not check this recently.
Sometimes piCorePlayer does not detect XMC-1 correctly, though. But this
also happened with other lunix devices. My Pi2 is powered through the
second USB port of the XMC-1. So it powers up when I switch on the
XMC-1.
2167 Alben mit 26564 Titel von 3737 Interpreten.
------------------------------------------------------------------------
Meridion's Profile: http://forums.slimdevices.com/member.php?userid=18619
View this thread: http://forums.slimdevices.com/showthread.php?t=97803
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
