Meridion wrote: > Yes, I'm using Firmware 3.0. > 24bits: When you don't set bit depth, it get's selected correctly. I you > use hw: or plughw: sound is routed directly to alsa/driver without any > software conversion or mixing. > If I don't set the tweak settings I also get either distorted or > clicking sound.I appreciate you responding. If you could, would you run "cat /proc/asound/card0/stream0" from an ssh shell and post the results here?
When I run with hw:0,0 and 80:4:16 I get these results: Emotiva Audio Inc XMC-1 at usb-bcm2708_usb-1.5, high speed : USB Audio Playback: Status: Running Interface = 1 Altset = 1 Packet Size = 63 Momentary freq = 96063 Hz (0xc.0200) Feedback Format = 16.16 Interface 1 Altset 1 Format: S16_LE Channels: 2 Endpoint: 5 OUT (ASYNC) Rates: 44100, 48000, 88200, 96000, 176400, 192000 Data packet interval: 125 us Interface 1 Altset 2 Format: S24_3LE Channels: 2 Endpoint: 5 OUT (ASYNC) Rates: 44100, 48000, 88200, 96000, 176400, 192000 Data packet interval: 125 us I believed this is telling me I am running 16 bit mode up to 192k. When I use hw:0,0 and 80:4:: with dwc_otg.speed=1 I get: Emotiva Audio Inc XMC-1 at usb-bcm2708_usb-1.5, full speed : USB Audio Playback: Status: Running Interface = 1 Altset = 1 Packet Size = 200 Momentary freq = 44131 Hz (0x2c.2198) Feedback Format = 10.14 Interface 1 Altset 1 Format: S16_LE Channels: 2 Endpoint: 5 OUT (ASYNC) Rates: 44100, 48000 I believe this is telling me I am running 16 bit (S16_LE) only up to 48k. I don't want to contradict you but I cannot see how you are getting 24 bit audio based on my testing. Your ssh results will verify this? Thanks. -CB ------------------------------------------------------------------------ ctbarker32's Profile: http://forums.slimdevices.com/member.php?userid=2816 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
