Kev6eel wrote: > I am new to VB and Linux and having some issues getting my new VBA to > play using SqueezeLite via USB through my Arcam rDAC. Any suggestions or > pointers would be appreciated. > > The Arcam rDAC shows the USB input from the VB appliance is synced (DAC > sync LED is green) but I get no audio through the analogue outputs.I > have tried another DAC and get no output (but no error message) . VB > sees the rDAC and has set up the audio outputs. This is the status after > a reboot with the DAC attached: > > [root@vortexbox ~]# squeezelite -l > Output devices: > null - Discard all samples (playback) or generate zero samples > (capture) > default:CARD=DAC - ARCAM DAC, USB Audio - Default Audio Device > sysdefault:CARD=DAC - ARCAM DAC, USB Audio - Default Audio Device > front:CARD=DAC,DEV=0 - ARCAM DAC, USB Audio - Front speakers > surround40:CARD=DAC,DEV=0 - ARCAM DAC, USB Audio - 4.0 Surround output > to Front and Rear speakers > surround41:CARD=DAC,DEV=0 - ARCAM DAC, USB Audio - 4.1 Surround output > to Front, Rear and Subwoofer speakers > surround50:CARD=DAC,DEV=0 - ARCAM DAC, USB Audio - 5.0 Surround output > to Front, Center and Rear speakers > surround51:CARD=DAC,DEV=0 - ARCAM DAC, USB Audio - 5.1 Surround output > to Front, Center, Rear and Subwoofer speakers > surround71:CARD=DAC,DEV=0 - ARCAM DAC, USB Audio - 7.1 Surround output > to Front, Center, Side, Rear and Woofer speakers > iec958:CARD=DAC,DEV=0 - ARCAM DAC, USB Audio - IEC958 (S/PDIF) Digital > Audio Output > default:CARD=PCH - HDA Intel PCH, ALC662 rev3 Analog - Default Audio > Device > sysdefault:CARD=PCH - HDA Intel PCH, ALC662 rev3 Analog - Default Audio > Device > front:CARD=PCH,DEV=0 - HDA Intel PCH, ALC662 rev3 Analog - Front > speakers > surround40:CARD=PCH,DEV=0 - HDA Intel PCH, ALC662 rev3 Analog - 4.0 > Surround output to Front and Rear speakers > surround41:CARD=PCH,DEV=0 - HDA Intel PCH, ALC662 rev3 Analog - 4.1 > Surround output to Front, Rear and Subwoofer speakers > surround50:CARD=PCH,DEV=0 - HDA Intel PCH, ALC662 rev3 Analog - 5.0 > Surround output to Front, Center and Rear speakers > surround51:CARD=PCH,DEV=0 - HDA Intel PCH, ALC662 rev3 Analog - 5.1 > Surround output to Front, Center, Rear and Subwoofer speakers > surround71:CARD=PCH,DEV=0 - HDA Intel PCH, ALC662 rev3 Analog - 7.1 > Surround output to Front, Center, Side, Rear and Woofer speakers > hdmi:CARD=PCH,DEV=0 - HDA Intel PCH, HDMI 0 - HDMI Audio Output > > > [root@vortexbox prefs]# aplay -l > **** List of PLAYBACK Hardware Devices **** > card 0: DAC [ARCAM DAC], device 0: USB Audio [USB Audio] > Subdevices: 0/1 > Subdevice #0: subdevice #0 > card 1: PCH [HDA Intel PCH], device 0: ALC662 rev3 Analog [ALC662 rev3 > Analog] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > card 1: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > > ALSA device list 0 [DAC ]: USB-Audio - ARCAM DAC > ARCAM ARCAM DAC at usb-0000:00:1a.0-1.2, full speed > 1 [PCH ]: HDA-Intel - HDA Intel PCH > HDA Intel PCH at 0xf7e00000 irq 43 > List of audio device ports 1: : sequencer > 2: [ 0- 0]: digital audio playback > 3: [ 0] : control > 4: [ 1- 3]: digital audio playback > 5: [ 1- 0]: digital audio playback > 6: [ 1- 0]: digital audio capture > 7: [ 1- 3]: hardware dependent > 8: [ 1- 0]: hardware dependent > 9: [ 1] : control > 33: : timer > I have tried various player settings in VB; plughw:0,0 CARD=DAC,DEV=0 > etc. > However whenever I configure and set the VB player settings for the rDAC > I get the following error: > > ALSA sound/usb/clock,c:309 3:1:1: cannot get freq at ep 0x1 > > > Thanks > > Kev I no longer have VB installed so can't check this out, but I wonder whether you are configuring the VB player, or squeezelite. They used to be two different output methods. I suggest you ask for help over on the VB forum.
LMS 7.9 on VortexBox Midi, Xubuntu 14.04, FLACs 16->24 bit, 44.1->192kbps. LMS plugin UPnP/DLNA Bridge to MF M1 CLiC (to MF amp & ESLs) & Marantz CR603 UPnP renderers. Minimserver (server) & upplay (control point) to same & to upmpdcli/mpd PC renderers. Squeezelite to Meridian USB Explorer DAC to speakers/phones. Wireless Xubuntu 15.04 laptop with firefox/upplay or Android 'phone with Squeeze-Commander/BubbleUPnP controls LMS/Minimserver. Have a Touch with EDO, plus spare, but unused. ------------------------------------------------------------------------ PasTim's Profile: http://forums.slimdevices.com/member.php?userid=41642 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
