I am new to VB and Linux and having some issues getting my new VBA to play using SqueezeLite via USB through my Arcam rDAC. Any suggestions or pointers would be appreciated.
The Arcam rDAC shows the USB input from the VB appliance is synced (DAC sync LED is green) but I get no audio through the analogue outputs.I have tried another DAC and get no output (but no error message) . VB sees the rDAC and has set up the audio outputs. This is the status after a reboot with the DAC attached: [root@vortexbox ~]# squeezelite -l Output devices: null - Discard all samples (playback) or generate zero samples (capture) default:CARD=DAC - ARCAM DAC, USB Audio - Default Audio Device sysdefault:CARD=DAC - ARCAM DAC, USB Audio - Default Audio Device front:CARD=DAC,DEV=0 - ARCAM DAC, USB Audio - Front speakers surround40:CARD=DAC,DEV=0 - ARCAM DAC, USB Audio - 4.0 Surround output to Front and Rear speakers surround41:CARD=DAC,DEV=0 - ARCAM DAC, USB Audio - 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=DAC,DEV=0 - ARCAM DAC, USB Audio - 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=DAC,DEV=0 - ARCAM DAC, USB Audio - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=DAC,DEV=0 - ARCAM DAC, USB Audio - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=DAC,DEV=0 - ARCAM DAC, USB Audio - IEC958 (S/PDIF) Digital Audio Output default:CARD=PCH - HDA Intel PCH, ALC662 rev3 Analog - Default Audio Device sysdefault:CARD=PCH - HDA Intel PCH, ALC662 rev3 Analog - Default Audio Device front:CARD=PCH,DEV=0 - HDA Intel PCH, ALC662 rev3 Analog - Front speakers surround40:CARD=PCH,DEV=0 - HDA Intel PCH, ALC662 rev3 Analog - 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 - HDA Intel PCH, ALC662 rev3 Analog - 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 - HDA Intel PCH, ALC662 rev3 Analog - 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 - HDA Intel PCH, ALC662 rev3 Analog - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 - HDA Intel PCH, ALC662 rev3 Analog - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers hdmi:CARD=PCH,DEV=0 - HDA Intel PCH, HDMI 0 - HDMI Audio Output [root@vortexbox prefs]# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: DAC [ARCAM DAC], device 0: USB Audio [USB Audio] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: PCH [HDA Intel PCH], device 0: ALC662 rev3 Analog [ALC662 rev3 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 ALSA device list 0 [DAC ]: USB-Audio - ARCAM DAC ARCAM ARCAM DAC at usb-0000:00:1a.0-1.2, full speed 1 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf7e00000 irq 43 List of audio device ports 1: : sequencer 2: [ 0- 0]: digital audio playback 3: [ 0] : control 4: [ 1- 3]: digital audio playback 5: [ 1- 0]: digital audio playback 6: [ 1- 0]: digital audio capture 7: [ 1- 3]: hardware dependent 8: [ 1- 0]: hardware dependent 9: [ 1] : control 33: : timer I have tried various player settings in VB; plughw:0,0 CARD=DAC,DEV=0 etc. However whenever I configure and set the VB player settings for the rDAC I get the following error: ALSA sound/usb/clock,c:309 3:1:1: cannot get freq at ep 0x1 Thanks Kev ------------------------------------------------------------------------ Kev6eel's Profile: http://forums.slimdevices.com/member.php?userid=64918 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
