bpa wrote: > If it is working you can omit the "-d output=info " - it is there only > for debugging > > To be strictly, it may be better to have a DEV setting on the ALSA > device - otherwise it is default to zero. > > You may also get issues later on with using sysdefault rather than an > explicit device - such as not supporting certain data rates.
I have removed the -d parameter. But what then do I set DEV to? Or more to the point, the -o parameter? I am just using the Pi's headphone jack at the moment. squeezelite -l gives the following: default - Playback/recording through the PulseAudio sound server null - Discard all samples (playback) or generate zero samples (capture) jack - JACK Audio Connection Kit pulse - PulseAudio Sound Server sysdefault:CARD=ALSA - bcm2835 ALSA, bcm2835 ALSA - Default Audio Device dmix:CARD=ALSA,DEV=0 - bcm2835 ALSA, bcm2835 ALSA - Direct sample mixing device dmix:CARD=ALSA,DEV=1 - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct sample mixing device dmix:CARD=ALSA,DEV=2 - bcm2835 ALSA, bcm2835 IEC958/HDMI1 - Direct sample mixing device dsnoop:CARD=ALSA,DEV=0 - bcm2835 ALSA, bcm2835 ALSA - Direct sample snooping device dsnoop:CARD=ALSA,DEV=1 - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct sample snooping device dsnoop:CARD=ALSA,DEV=2 - bcm2835 ALSA, bcm2835 IEC958/HDMI1 - Direct sample snooping device hw:CARD=ALSA,DEV=0 - bcm2835 ALSA, bcm2835 ALSA - Direct hardware device without any conversions hw:CARD=ALSA,DEV=1 - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct hardware device without any conversions hw:CARD=ALSA,DEV=2 - bcm2835 ALSA, bcm2835 IEC958/HDMI1 - Direct hardware device without any conversions plughw:CARD=ALSA,DEV=0 - bcm2835 ALSA, bcm2835 ALSA - Hardware device with all software conversions plughw:CARD=ALSA,DEV=1 - bcm2835 ALSA, bcm2835 IEC958/HDMI - Hardware device with all software conversions plughw:CARD=ALSA,DEV=2 - bcm2835 ALSA, bcm2835 IEC958/HDMI1 - Hardware device with all software conversions usbstream:CARD=ALSA - bcm2835 ALSA - USB Stream Output Also is it worth setting the MAC address or anything else to ensure it always works? SB3 -> Quad 909 -> Quad Electrostatic speakers, Quad 405 -> TBI subwoofer 3 x SB3s + SB Radio Rotel RSP1068 surround processor, Quad 99 -> B&W surround ------------------------------------------------------------------------ rbl's Profile: http://forums.slimdevices.com/member.php?userid=4517 View this thread: http://forums.slimdevices.com/showthread.php?t=112025 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
