@MJBR Using this thread as a guide I have just enabled a wireless instance of piCoreplayer on a rpi4b
https://forums.slimdevices.com/showthread.php?112765-piCorePlayer-on-RPi-Zero-W-first-time-wifi-settings On a Windows 10 pro Desktop I downloaded and unzipped pCP v6.1.0 from https://repo.picoreplayer.org/insitu/piCorePlayer6.1.0/piCorePlayer6.1.0.zip I used this utility to make the image http://https://www.raspberrypi.org/blog/raspberry-pi-imager-imaging-utility/ I remounted the card carrier and opened it in "This PC" I created a new txt file called wpa_supplicant.conf and opened it with Wordpad added the following > ssid="my router ssid" > psk=" my password" Saved, dismounted the SD card, put it in the pi and powered up (I connected the pi to a monitor to watch the output, but this is not necessary) Navigated to the router's DHCP page and found the pi's IP addresss from the Client List Opened the IP address in a web browser and completed the wifi set-up as in Greg's post. To complete the install: Save the settings, note the new IP address and reboot. Select "beta" mode from the bottom of the web gui Install LMS and then set up the Player on the Squeezelite tab Install the usb stick, (maybe add additional file systems) reboot and configure the stick from the LMS tab on the web gui Scan the stick from within LMS and add any Plugins you require I hope this helps:) ronnie ------------------------------------------------------------------------ Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=112764 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
