Man in a van wrote:
>
> But only one file (sound) shows (that I can see, I might have missed
> it)
>
It's there in the 'no sound' case, just a little further down. In fact
the dmesg entries that appear when the dac is inserted later in the
'sound' case are all there in the 'no sound' case, but interspersed with
other entries.
Sound:
Code:
--------------------
[ 45.187324] No dialect specified on mount. Default has changed to a more
secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less
secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1)
specify vers=1.0 on mount.
[ 52.129078] Finished piCorePlayer v7.0.0 startup.
[ 110.791698] USB 1-1.4: NEW HIGH-SPEED USB DEVICE NUMBER 3 USING XHCI_HCD
[ 110.922530] USB 1-1.4: NEW USB DEVICE FOUND, IDVENDOR=152A,
IDPRODUCT=85DF, BCDDEVICE= 6.F2
[ 110.922548] USB 1-1.4: NEW USB DEVICE STRINGS: MFR=1, PRODUCT=3,
SERIALNUMBER=0
[ 110.922565] USB 1-1.4: PRODUCT: SABAJ DA2 V1.2
[ 110.922581] USB 1-1.4: MANUFACTURER: SABAJ
[ 110.945818] MC: LINUX MEDIA INTERFACE: V0.10
[ 111.008379] USB 1-1.4: 1:3 : UNSUPPORTED FORMAT BITS 0X100000000
[ 111.020862] USBCORE: REGISTERED NEW INTERFACE DRIVER SND-USB-AUDIO
[ 183.071011] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some
data may be corrupt. Please run fsck.
[ 189.771340] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some
data may be corrupt. Please run fsck.
--------------------
No Sound:
Code:
--------------------
[ 1.345590] hub 1-1:1.0: USB hub found
[ 1.345874] hub 1-1:1.0: 4 ports detected
[ 1.681661] USB 1-1.4: NEW HIGH-SPEED USB DEVICE NUMBER 3 USING XHCI_HCD
[ 1.812278] USB 1-1.4: NEW USB DEVICE FOUND, IDVENDOR=152A,
IDPRODUCT=85DF, BCDDEVICE= 6.F2
[ 1.812285] USB 1-1.4: NEW USB DEVICE STRINGS: MFR=1, PRODUCT=3,
SERIALNUMBER=0
[ 1.812292] USB 1-1.4: PRODUCT: SABAJ DA2 V1.2
[ 1.812298] USB 1-1.4: MANUFACTURER: SABAJ
[ 3.240241] zram: Added device: zram0
[ 3.245548] zram0: detected capacity change from 0 to 491057152
[ 3.248845] random: mkswap: uninitialized urandom read (16 bytes read)
[ 3.311663] Adding 479544k swap on /dev/zram0. Priority:-2 extents:1
across:479544k SSFS
[ 3.386067] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.764786] EXT4-fs (mmcblk0p2): recovery complete
[ 3.765716] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data
mode. Opts: (null)
[ 3.796219] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data
mode. Opts: (null)
[ 13.040334] MC: LINUX MEDIA INTERFACE: V0.10
[ 13.144305] USB 1-1.4: 1:3 : UNSUPPORTED FORMAT BITS 0X100000000
[ 13.145644] cfg80211: Loading compiled-in X.509 certificates for
regulatory database
[ 13.162495] USBCORE: REGISTERED NEW INTERFACE DRIVER SND-USB-AUDIO
[ 13.200901] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 13.229929] brcmfmac: F1 signature read @0x18000000=0x15264345
--------------------
I'm also no expert, but to me this suggests that the hardware
recognition and driver loading are the same in both cases. Maybe it
points to an issue with the alsa configuration, but I don't have any
bright ideas.
------------------------------------------------------------------------
chill's Profile: http://forums.slimdevices.com/member.php?userid=10839
View this thread: http://forums.slimdevices.com/showthread.php?t=113895
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
