I'm still trying to 'sort out the problems' (https://forums.slimdevices.com/showthread.php?103330-Jivelite-for-piCorePlayer&p=1013061&viewfull=1#post1013061) I am having with Jivelite on piCorePlayer 7.0.1 on a Pi with a touchscreen and am digging deeper. I found an issue unrelated to that that I thought might be useful to note here.
I suspect that the "setup" utility you can run for piCorePlayer from the command line is not fully functional, and indeed, there's a warning that it may not be up to date that I saw, so this is less a complaint than a report. I have a dedicated "media" SSID that is a hidden SSID with a WPA PSK. Using the "setup" utility with a keyboard plugged in, I set the SSID and PSK and rebooted. I was unable to connect to my media wireless network. Using the Web GUI to configure wireless (via a wired connection), I got it to connect, and copied the resulting wpa_supplicant.conf file off. I then started completely from scratch and burned a new image to the SD card, and copied that wpa_supplicant.conf file to the SD card as documented. That worked. There are configuration elements in the supplicant as configured by the Web GUI that aren't configured by "setup", but I haven't tested to see which elements are critical. ------------------------------------------------------------------------ benh's Profile: http://forums.slimdevices.com/member.php?userid=6732 View this thread: http://forums.slimdevices.com/showthread.php?t=113512 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
