chill wrote: > That's what I started with. > > > > I hesitate to imply that these are the definitive steps needed - I > simply copied what was done before. And this will all become redundant > anyway as soon as Paul gets hold of his PI02 and makes an image that > works out of the box. But in the meantime: > > 1) bcm2710-rpi-zero-2.dtb goes in the top level of that PCP_BOOT drive - > no need to make another folder. You should see a number of other dtb > files in there already. > > 2) config.txt is also in the top level of PCP_BOOT. You need to use an > editor that won't change line endings or add another file extension etc. > Not sure what's best on Windows - Notepad? > > 3) For the final step you'll need to somehow mount the second partition > (PCP_ROOT) in order to place firmware-rpi-wifi in > PCP_ROOT/tce/optional/. I suspect you won't be able to mount it on a > Windows machine. I used a Linux laptop to do this step. I guess you > could probably mount both partitions of this SD card on another > Raspberry Pi that's running pCP.
Thanks Chill, My DAC and case isn't arriving until Thursday so I'll wait and see if any new images appear by then. If not I'll sort an old linux laptop out.... ------------------------------------------------------------------------ lozcspi's Profile: http://forums.slimdevices.com/member.php?userid=72233 View this thread: http://forums.slimdevices.com/showthread.php?t=115331 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
