paul- wrote: > pCP8 with RPi 7" DSI or other DPI display + HDMI Audio > > So I've made some progress here, there is no one generic setting that > works for all. > > You will need to edit the config.txt on the boot partition. > > > - Comment out or delete the line gpu_mem=xxx - add a line at the end max_framebuffers=2 - add a line at the end display_default_lcd=1 - add a line at the end framebuffer_priority=0 (For RPi 7" DSI > LCD screen) > > > > > If you are using a 3rd party DPI screen like the "Hyperpixel" Then you > will want to set frambuffer_priority=1.
Hi. I have a Raspberry Pi4 with the original 7" touch display (DSI). I would like to connect Hubert nuBox A-125 via HDMI. I have made the above changes. Unfortunately the boxes remain silent, even if everything else looks good. Before I made the changes, there was an error message with HDMI output with the default settings. Can anyone give me a hint? ------------------------------------------------------------------------ nupi's Profile: http://forums.slimdevices.com/member.php?userid=73244 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
