Use XPostFacto to boot back into it

On 9/10/02 6:11 PM, "Phil A. Lefebvre" <[EMAIL PROTECTED]> wrote:

> I have OS X 10.2 installed on an 8 GB drive attached to the internal
> SCSI bus of my 8500. It has worked fine for a couple of weeks. I
> booted in and out of it to do some troubleshooting, and could not
> boot back into it. I think this may have been caused by either Norton
> Utilities 7 or Disk Warrior 1.1 fixing it. (Happened to me after
> doing that with 10.1). Fine.
> 
> Startup Disk CP saw the OS X system in 9, I'd select it, but it would
> never boot up, just revert to one of the many OS 8/9 systems I have
> on various disks. I tried using Conflict Catcher 9 to select it as a
> boot disk at start up (the feature I upgraded for) but the OS X
> system was greyed out. Fine.
> 
> I booted to the OS 9.1 system on the same disk (my Classic system),
> and followed a previous suggestion to debless all the system folders
> by removing the Finder, to force it to use the OS X system. Still no
> OS X booting, just the flashing question mark. Fine.
> 
> Tried to boot from a CD, but no bootable CD I tried will be
> recognized by the computer. Zapped the PRAM several times, after both
> a warm boot and a cold boot. Nothing happens. Now I'm stuck on a
> flashing question mark with no way to boot my computer. Not fine!
> 
> Anyone have any suggestions how to get my 8500 back on line, and how
> to prevent OS X from becoming "unblessed" in the future? Thanks.


-- 
Unsupported OS X is sponsored by <http://lowendmac.com/>

      Support Low End Mac <http://lowendmac.com/lists/support.html>

Unsupported OS X list info <http://lowendmac.com/lists/unsupported.html>
Send list messages to:     <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:     <mailto:[EMAIL PROTECTED]>
For digest mode, email:    <mailto:[EMAIL PROTECTED]>
Subscription questions:    <mailto:[EMAIL PROTECTED]>
Archive <http://www.mail-archive.com/unsupportedosx%40mail.maclaunch.com/>

Using a Mac? Free email & more at Applelinks! http://www.applelinks.com

Reply via email to