> My understanding is that USB2.0 card won't work in anything less thanB&W. I tried a USB 2.0 Card in PM9600 (at that point only running OS9) and had no luck.
I have USB 2.0 cards in my Beige G3 and in my Sonnet-upgraded 7500. OS X recognises the EHCI chip set and I haven't run into any problems with them. And, yes, InforMac shows USB 2.0 devices on the EHCI bus.
OS 9 has no support for EHCI, so it will only work with OHCI or UHCI based cards (either multi-controller or with emulation). I suspect that was where you ran into a problem.
Peter,
Thanks for info. As I mentioned I didn't look too far into chipset etc as it was over 18mths ago. I was basically looking at adding a USB Hub and then thought I'd throw another card in (advantage of 9600 is lot's of PCI slots) and at same time thought to upgrade to USB2. Ended up getting powered USB hub that sits on PCI mounting bracket so kept it all nice and neat and inside box.
-- Unsupported OS X is sponsored by <http://lowendmac.com/>
Support Low End Mac <http://lowendmac.com/lists/support.html>
Unsupported OS X list info <http://lowendmac.com/lists/unsupported.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive <http://www.mail-archive.com/unsupportedosx%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
