Hi Studio, I will go back to the start of your tutorial as you suggest and load the correct startup arguements. Failing that I will install a faster network card on one of the machines that do work, and see if that's the problem.
Thanks again, Chris ----- Original Message ----- From: "studio" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, January 12, 2007 2:49 AM Subject: Re: Network rendering > Man : > > I need a vacation . First of all , the sceenshot I sent last > mail was not correct . It should not have been of the PRS.exe > but either RendD.exe or RendW.exe (D for DOS , W for Window) . > > Secondly , I just read my Wiki tutorial again and all that > was required was in there , right from the start . No idea > how I missed that info . Guess I need glasses as well as a > vacation . > > The problem started for me , when I launched PRS.exe and > did not see anything in the DOS window , and assumed it was > non-functioning . It wasn't , but was just very very quiet . > > Never assume . Oh well , after a year off from network > rendering I guess I needed a refresher course . > > studio > > > > > > > > I'm running PRS in a 6 computer setup without much problems. > > > The only error I get on a regular basis is that RendW/RendD have a bug > > > putting arguments in the wrong field at startup sometimes. > > > Arjo. > > > > OK , got it working : > > > > Turns out it was human error again (mine!) . Arjo mentioning > > that there were wrong arguments got me thinking . Then , I went > > back over the manual's example and it finally sank in . > > > > Two things : > > > > 1) Even though there is no activity in the PRS.exe DOS window > > PRS.exe is still showing as active as a Task Manager Process . > > 2) You will have to 'Run' RendD.exe or RendW.exe (as the manual > > says) with the correct startup arguments . > > > > The easiest way to do that is to just add the correct arguments > > in a "shortcut to RendW.exe"(see my wiki tutorial again for how to > > do that) on _ALL_ computers . > > > > So that's all it was , the default startup arguments _MUST_ > > be changed for PRS.exe to run . In my case my main PRS server > > (host5 , in the manual's example) is called "celery" . So then > > I would have to add that to the rendW.exe shortcuts (see att- > > achment) . > > > > Guess I'll have to go back to that tutorial and add that > > part in . Not sure how I managed to overlook it in the first > > place , since it is actually very critical . > > > > However , this may not solve your problems , Chris. If your > > firewall is down then I'm guessing it has something to do with > > your new 1 gig cards , somehow , unless it is an odd problem > > with older plugins not being up to date , as Jason mentioned . > > > > studio > > > > > > > > > > > > > -------------------------------------------------------------------------- ------ > > > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.410 / Virus Database: 268.16.8/621 - Release Date: 1/9/2007 > > > > -- > Internal Virus Database is out-of-date. > Checked by AVG Free Edition. > Version: 7.5.428 / Virus Database: 268.13.21/510 - Release Date: 01/11/2006 08:00 > >
