Hi Robert, Thanks for the response. It was all working while earlier . I am getting this error past couple of days . As you mentioned check the drill bit health and state of the server environment . Which configurations do I need check ? Can you please elaborate more. I am successfuly able to connevt to Drill through Drill explorer and through Web UI of Apache Drill . Earlier I was able to connect Drill through tableau without making changes to Drill configurations . I haven't made any changes to Drill configurations also. Wondering what triggering handshake error.
Grateful for your help ! Thanks, Divya On 2 May 2018 at 17:08, Robert Wu <[email protected]> wrote: > Hi Divya, > > Normally 5 second default for the client server handshake is enough for > most setup. > Since you mentioned that this incident is out of the ordinary, I would > double check the health of the drillbit and the state of the server > environment. > > ------------------ If you need to modify the handshake timeout value > ------------------ > You can set the HandshakeTimeout value in the AdvancedProperties field in > the ODBC driver. The default value is 5 seconds. > https://drill.apache.org/docs/odbc-configuration-reference/ > > Are you connecting to drillbit using Tableau's " Other Databases (ODBC)" > connector or the "Apache Drill" connector? > > If you are using the "Other Databases (ODBC)" connector in Tableau: > And connecting via DSN: > Please open the ODBC Administrator (make sure it’s the > correct bitness) and click on the "System DSN" tab. > Then, click on "MapR Drill" and then click the > "Configure..." button on the right. > Then, please modify the default HandshakeTimeout value > from 5 seconds to your preference. > Then, click the ok button to save the setting. > > And connecting via Driver: > A configuration popup window should appear when you try to > connect. Add HandshakeTimeout=<value> in the AdvancedProperties field. > > If you are using the Apache Drill connector in Tableau: > Then you would need to create a custom settings file for Tableau > to pick up this information. > > Best regards, > > Rob > > -----Original Message----- > From: Divya Gehlot <[email protected]> > Sent: Wednesday, May 2, 2018 12:11 AM > To: [email protected] > Subject: tableau drill connection - handshake time out error > > Hi , > I am connecting Apache Drill through Tableau 10.X version . > I was able to connect successfully for this while Now all of sudden I am > getting handshake timeout error when I try connect drill through tableau. > Error : > [MapR][Drill] (40) Handshake timed out (HandshakeTimeout=5) while trying > to connect to local=xx.xx.xx.x:31010. Check whether Drillbit is running in > a healthy state or increase the timeout. > > I try adding below configurations in drill-overide.conf also #Optional > handshakeTimeout in milliseconds. Default is 10000 ms (10 > seconds) > handshakeTimeout: 60000, > > but it didnt help. > > Appreciate the help ! > > Thanks, > Divya >
