@joris, can you help out here?

On Tue, Aug 11, 2015 at 9:43 AM, Carlos Sanchez <[email protected]> wrote:

> I have tried to enable SSL with no success, even compiling from source
> with the ssl flags --enable-libevent --enable-ssl
>
> export SSL_ENABLED=true
> export SSL_SUPPORT_DOWNGRADE=false
> export SSL_REQUIRE_CERT=true
> export SSL_CERT_FILE=/etc/mesos/...
> export SSL_KEY_FILE=/etc/mesos/...
> export SSL_CA_FILE=/etc/mesos/...
>
>
> /home/ubuntu/mesos-deb-packaging/mesos-repo/build/src/mesos-master
> --work_dir="/var/lib/mesos"
>
> Port 5050 is still served as plain http, no SSL
>
> Nothing about ssl shows up in the logs, any ideas?
>
> Thanks
>
>
> >
> > From: Dharmit Shah <[email protected]>
> > To: [email protected]
> > Cc:
> > Date: Mon, 10 Aug 2015 14:13:04 +0530
> > Subject: Re: SSL in Mesos 0.23
> > Hi Jeff,
> >
> > Thanks for the suggestion.
> >
> > I modified the systemd service file to use
> > `/etc/sysconfig/mesos-master` and `/etc/sysconfig/mesos-slave` as
> > environment files for master and slave services respectively. In these
> > files, I specified the environment variables that I used to specify on
> > the command line.
> >
> > Now if I check `strings /proc/<pid>/environ | grep SSL` for pids of
> > master and slave services, I see the environment variables that I set
> > in the /etc/sysconfig/<environment-file>.
> >
> > Now that it looks like I have started the master and slave services
> > with SSL enabled, how do I really confirm that communication between
> > master and slaves is really happening over SSL?
> >
> > Also, how do I enable SSL communication for a framework like Marathon?
> >
> > Regards,
> > Dharmit.
> >
> > On Fri, Aug 7, 2015 at 10:56 PM, Jeff Schroeder
> > <[email protected]> wrote:
> > > The sudo command defaults to envreset (look for that in the man page)
> which
> > > strips all env variables sans a select few. I'd almost bet that your
> SSL_*
> > > variables are not present and were not passed to the slave. Just sudo
> -i and
> > > start the slaves *as root* without sudo. There is no benefit to
> starting
> > > them with sudo. You can verify what I'm saying with something along the
> > > lines of:
> > >
> > > strings /proc/$(pidof mesos-slave)/environ | grep ^SSL_
> > >
> > >
> > > On Friday, August 7, 2015, Dharmit Shah <[email protected]> wrote:
> > >>
> > >> Hello again,
> > >>
> > >> Thanks for your responses. I will share what I tried after your
> > >> suggestions.
> > >>
> > >> 1. `ldd /usr/sbin/mesos-master` and `ldd /usr/sbin/mesos-slave`
> > >> returned similar output as one suggested by Craig. So, I guess, the
> > >> Mesosphere repo binaries have SSL enabled. Right?
> > >>
> > >> 2. I created SSL private key and cert on one system in my cluster by
> > >> referring this guide on DO [1]. Admittedly, my knowledge of SSL is
> > >> limited.
> > >>
> > >> 3. Next, I copied the key and cert to all three mesos-master nodes and
> > >> four mesos-slave nodes. Shouldn't slave nodes be provided only with
> > >> the cert and not the private key? Whereas all master nodes may have
> > >> the private key and cert both. Or am I understanding SSL incorrectly
> > >> here?
> > >>
> > >> 4. After copying the cert and key, I started the mesos-master service
> > >> on master nodes with below command:
> > >>
> > >>     $ sudo SSL_ENABLED=true SSL_KEY_FILE=~/ssl/mesos.key
> > >> SSL_CERT_FILE=~/ssl/mesos.crt /usr/sbin/mesos-master
> > >> --zk=zk://172.19.10.111:2181,172.19.10.112:2181,
> 172.19.10.193:2181/mesos
> > >> --port=5050 --log_dir=/var/log/mesos --acls=file:///root/acls.json
> > >> --credentials=/home/isys/mesos --quorum=2 --work_dir=/var/lib/mesos
> > >>
> > >> I check web UI and things look good. I am not completely sure if
> > >> "https" should have worked for mesos web UI but, it didn't.
> > >>
> > >> 5. Next, I start slave nodes with below command:
> > >>
> > >>   $ sudo SSL_ENABLED=true SSL_CERT_FILE=~/mesos.crt
> > >> SSL_KEY_FILE=~/mesos.key /usr/sbin/mesos-slave
> > >>
> > >> --master=zk://172.19.10.111:2181,172.19.10.112:2181,
> 172.19.10.193:2181/mesos
> > >> --log_dir=/var/log/mesos --containerizers=docker,mesos
> > >> --executor_registration_timeout=15mins
> > >>
> > >> Mesos web UI reported four mesos-slave nodes in "Activated" mode. So
> > >> far so good. I am still wondering how I should verify if communication
> > >> is happening over SSL.
> > >>
> > >> 6. To check if SSL is indeed working, I stopped one slave node and
> > >> started it without SSL using `systemctl start mesos-slave`. I was
> > >> expecting it to not get into "Activated" state on Mesos web UI but it
> > >> did. So, I think SSL is not configured properly by me.
> > >>
> > >> I am attaching logs from the master nodes. These logs were generated
> > >> after starting masters with command specified in point 4.
> > >>
> > >> Let me know if I am doing something wrong or if you need more logs or
> > >> need me to execute some specific commands.
> > >>
> > >> [1]
> > >>
> https://www.digitalocean.com/community/tutorials/openssl-essentials-working-with-ssl-certificates-private-keys-and-csrs
> > >>
> > >> Regards,
> > >> Dharmit.
> > >>
> > >> On Fri, Aug 7, 2015 at 2:52 AM, Michael Park <[email protected]>
> wrote:
> > >> > Hi Dharmit,
> > >> >
> > >> > I'm not certain whether the Mesosphere deb packages have SSL
> enabled or
> > >> > not,
> > >> > although based on Craig's observation it looks like it is.
> > >> >
> > >> > I think the correct way to enable SSL is to set the SSL_ENABLED
> > >> > environment
> > >> > variable, rather than /etc/mesos-master/ssl_enabled. Of course,
> along
> > >> > with
> > >> > the rest of the SSL_ environment variables.
> > >> >
> > >> > e.g. SSL_ENABLED=true SSL_KEY_FILE=<path-to-your-private-key>
> > >> > SSL_CERT_FILE=<path-to-your-certificate> ./mesos-master
> <master-flags>
> > >> >
> > >> > MPark.
> > >> >
> > >> > On Thu, Aug 6, 2015 at 9:30 AM craig w <[email protected]> wrote:
> > >> >>
> > >> >> I've run ldd on /usr/sbin/mesos-master (on CentOS 7 using mesos
> 0.23
> > >> >> from
> > >> >> mesosphere repo) and I see "libssl.3.so" and "libssl.so.10"
> > >> >>
> > >> >> On Thu, Aug 6, 2015 at 12:20 PM, Jeff Schroeder
> > >> >> <[email protected]> wrote:
> > >> >>>
> > >> >>> Can you run ldd on the mesos-master or mesos-slave binaries? I
> believe
> > >> >>> you *should* see openssl libraries in the output if those
> packages are
> > >> >>> configured using --enable-ssl.
> > >> >>>
> > >> >>> On Thu, Aug 6, 2015 at 9:46 AM, Dharmit Shah <
> [email protected]>
> > >> >>> wrote:
> > >> >>>>
> > >> >>>> Hello,
> > >> >>>>
> > >> >>>> I followed Mesos cluster setup guide on the Mesosphere website
> [1]. I
> > >> >>>> set it up on a CentOS 7 system. For installation of packages, I
> went
> > >> >>>> with Mesosphere provided repositories.
> > >> >>>>
> > >> >>>> Now that Mesos 0.23 has been released with SSL capabilities, I
> > >> >>>> believe
> > >> >>>> it is possible to have communication between the master, slaves
> and
> > >> >>>> frameworks be secured by SSL. Am I right?
> > >> >>>>
> > >> >>>> I would like to set it up in my environment. I am using
> > >> >>>> `mesos-0.23.0-1.0.centos701406.x86_64`.
> > >> >>>>
> > >> >>>> The official Mesos documentation on the topic [2] illustrates how
> > >> >>>> things can be setup when building Mesos from source.
> > >> >>>>
> > >> >>>> I would like to know if Mesos package shipped by Mesosphere repo
> has
> > >> >>>> this feature or not yet? I tried setting
> > >> >>>> `/etc/mesos-master/ssl_enabled` on one of the master nodes. But
> > >> >>>> restarting `mesos-master` service failed stating that option
> > >> >>>> `ssl_enabled` is unknown.
> > >> >>>>
> > >> >>>> Thanks for your help!
> > >> >>>>
> > >> >>>> [1]
> http://open.mesosphere.com/getting-started/datacenter/install/
> > >> >>>> [2] http://mesos.apache.org/documentation/latest/mesos-ssl/
> > >> >>>>
> > >> >>>> Regards,
> > >> >>>> Dharmit.
> > >> >>>
> > >> >>>
> > >> >>>
> > >> >>>
> > >> >>> --
> > >> >>> Jeff Schroeder
> > >> >>>
> > >> >>> Don't drink and derive, alcohol and analysis don't mix.
> > >> >>> http://www.digitalprognosis.com
> > >> >>
> > >> >>
> > >> >>
> > >> >>
> > >> >> --
> > >> >>
> > >> >> https://github.com/mindscratch
> > >> >> https://www.google.com/+CraigWickesser
> > >> >> https://twitter.com/mind_scratch
> > >> >> https://twitter.com/craig_links
> > >
> > >
> > >
> > > --
> > > Text by Jeff, typos by iPhone
> >
> >
>

Reply via email to