looking forward to it, thanks!
running out of ideas here on what am I doing wrong

On Fri, Aug 14, 2015 at 6:53 PM, Marco Massenzio <[email protected]> wrote:
> FYI - Joris is out this week, he'll be probably able to get back to you
> early next (modulo MesosCon craziness :)
>
> Marco Massenzio
> Distributed Systems Engineer
>
> On Fri, Aug 14, 2015 at 9:14 AM, Carlos Sanchez <[email protected]> wrote:
>>
>> no suggestions?
>>
>> On Tue, Aug 11, 2015 at 6:47 PM, Vinod Kone <[email protected]> wrote:
>> > @joris, can you help out here?
>> >
>> > On Tue, Aug 11, 2015 at 9:43 AM, Carlos Sanchez <[email protected]>
>> > wrote:
>> >>
>> >> I have tried to enable SSL with no success, even compiling from source
>> >> with the ssl flags --enable-libevent --enable-ssl
>> >>
>> >> export SSL_ENABLED=true
>> >> export SSL_SUPPORT_DOWNGRADE=false
>> >> export SSL_REQUIRE_CERT=true
>> >> export SSL_CERT_FILE=/etc/mesos/...
>> >> export SSL_KEY_FILE=/etc/mesos/...
>> >> export SSL_CA_FILE=/etc/mesos/...
>> >>
>> >>
>> >> /home/ubuntu/mesos-deb-packaging/mesos-repo/build/src/mesos-master
>> >> --work_dir="/var/lib/mesos"
>> >>
>> >> Port 5050 is still served as plain http, no SSL
>> >>
>> >> Nothing about ssl shows up in the logs, any ideas?
>> >>
>> >> Thanks
>> >>
>> >>
>> >> >
>> >> > From: Dharmit Shah <[email protected]>
>> >> > To: [email protected]
>> >> > Cc:
>> >> > Date: Mon, 10 Aug 2015 14:13:04 +0530
>> >> > Subject: Re: SSL in Mesos 0.23
>> >> > Hi Jeff,
>> >> >
>> >> > Thanks for the suggestion.
>> >> >
>> >> > I modified the systemd service file to use
>> >> > `/etc/sysconfig/mesos-master` and `/etc/sysconfig/mesos-slave` as
>> >> > environment files for master and slave services respectively. In
>> >> > these
>> >> > files, I specified the environment variables that I used to specify
>> >> > on
>> >> > the command line.
>> >> >
>> >> > Now if I check `strings /proc/<pid>/environ | grep SSL` for pids of
>> >> > master and slave services, I see the environment variables that I set
>> >> > in the /etc/sysconfig/<environment-file>.
>> >> >
>> >> > Now that it looks like I have started the master and slave services
>> >> > with SSL enabled, how do I really confirm that communication between
>> >> > master and slaves is really happening over SSL?
>> >> >
>> >> > Also, how do I enable SSL communication for a framework like
>> >> > Marathon?
>> >> >
>> >> > Regards,
>> >> > Dharmit.
>> >> >
>> >> > On Fri, Aug 7, 2015 at 10:56 PM, Jeff Schroeder
>> >> > <[email protected]> wrote:
>> >> > > The sudo command defaults to envreset (look for that in the man
>> >> > > page)
>> >> > > which
>> >> > > strips all env variables sans a select few. I'd almost bet that
>> >> > > your
>> >> > > SSL_*
>> >> > > variables are not present and were not passed to the slave. Just
>> >> > > sudo
>> >> > > -i and
>> >> > > start the slaves *as root* without sudo. There is no benefit to
>> >> > > starting
>> >> > > them with sudo. You can verify what I'm saying with something along
>> >> > > the
>> >> > > lines of:
>> >> > >
>> >> > > strings /proc/$(pidof mesos-slave)/environ | grep ^SSL_
>> >> > >
>> >> > >
>> >> > > On Friday, August 7, 2015, Dharmit Shah <[email protected]>
>> >> > > wrote:
>> >> > >>
>> >> > >> Hello again,
>> >> > >>
>> >> > >> Thanks for your responses. I will share what I tried after your
>> >> > >> suggestions.
>> >> > >>
>> >> > >> 1. `ldd /usr/sbin/mesos-master` and `ldd /usr/sbin/mesos-slave`
>> >> > >> returned similar output as one suggested by Craig. So, I guess,
>> >> > >> the
>> >> > >> Mesosphere repo binaries have SSL enabled. Right?
>> >> > >>
>> >> > >> 2. I created SSL private key and cert on one system in my cluster
>> >> > >> by
>> >> > >> referring this guide on DO [1]. Admittedly, my knowledge of SSL is
>> >> > >> limited.
>> >> > >>
>> >> > >> 3. Next, I copied the key and cert to all three mesos-master nodes
>> >> > >> and
>> >> > >> four mesos-slave nodes. Shouldn't slave nodes be provided only
>> >> > >> with
>> >> > >> the cert and not the private key? Whereas all master nodes may
>> >> > >> have
>> >> > >> the private key and cert both. Or am I understanding SSL
>> >> > >> incorrectly
>> >> > >> here?
>> >> > >>
>> >> > >> 4. After copying the cert and key, I started the mesos-master
>> >> > >> service
>> >> > >> on master nodes with below command:
>> >> > >>
>> >> > >>     $ sudo SSL_ENABLED=true SSL_KEY_FILE=~/ssl/mesos.key
>> >> > >> SSL_CERT_FILE=~/ssl/mesos.crt /usr/sbin/mesos-master
>> >> > >>
>> >> > >>
>> >> > >> --zk=zk://172.19.10.111:2181,172.19.10.112:2181,172.19.10.193:2181/mesos
>> >> > >> --port=5050 --log_dir=/var/log/mesos --acls=file:///root/acls.json
>> >> > >> --credentials=/home/isys/mesos --quorum=2
>> >> > >> --work_dir=/var/lib/mesos
>> >> > >>
>> >> > >> I check web UI and things look good. I am not completely sure if
>> >> > >> "https" should have worked for mesos web UI but, it didn't.
>> >> > >>
>> >> > >> 5. Next, I start slave nodes with below command:
>> >> > >>
>> >> > >>   $ sudo SSL_ENABLED=true SSL_CERT_FILE=~/mesos.crt
>> >> > >> SSL_KEY_FILE=~/mesos.key /usr/sbin/mesos-slave
>> >> > >>
>> >> > >>
>> >> > >>
>> >> > >> --master=zk://172.19.10.111:2181,172.19.10.112:2181,172.19.10.193:2181/mesos
>> >> > >> --log_dir=/var/log/mesos --containerizers=docker,mesos
>> >> > >> --executor_registration_timeout=15mins
>> >> > >>
>> >> > >> Mesos web UI reported four mesos-slave nodes in "Activated" mode.
>> >> > >> So
>> >> > >> far so good. I am still wondering how I should verify if
>> >> > >> communication
>> >> > >> is happening over SSL.
>> >> > >>
>> >> > >> 6. To check if SSL is indeed working, I stopped one slave node and
>> >> > >> started it without SSL using `systemctl start mesos-slave`. I was
>> >> > >> expecting it to not get into "Activated" state on Mesos web UI but
>> >> > >> it
>> >> > >> did. So, I think SSL is not configured properly by me.
>> >> > >>
>> >> > >> I am attaching logs from the master nodes. These logs were
>> >> > >> generated
>> >> > >> after starting masters with command specified in point 4.
>> >> > >>
>> >> > >> Let me know if I am doing something wrong or if you need more logs
>> >> > >> or
>> >> > >> need me to execute some specific commands.
>> >> > >>
>> >> > >> [1]
>> >> > >>
>> >> > >>
>> >> > >> https://www.digitalocean.com/community/tutorials/openssl-essentials-working-with-ssl-certificates-private-keys-and-csrs
>> >> > >>
>> >> > >> Regards,
>> >> > >> Dharmit.
>> >> > >>
>> >> > >> On Fri, Aug 7, 2015 at 2:52 AM, Michael Park <[email protected]>
>> >> > >> wrote:
>> >> > >> > Hi Dharmit,
>> >> > >> >
>> >> > >> > I'm not certain whether the Mesosphere deb packages have SSL
>> >> > >> > enabled or
>> >> > >> > not,
>> >> > >> > although based on Craig's observation it looks like it is.
>> >> > >> >
>> >> > >> > I think the correct way to enable SSL is to set the SSL_ENABLED
>> >> > >> > environment
>> >> > >> > variable, rather than /etc/mesos-master/ssl_enabled. Of course,
>> >> > >> > along
>> >> > >> > with
>> >> > >> > the rest of the SSL_ environment variables.
>> >> > >> >
>> >> > >> > e.g. SSL_ENABLED=true SSL_KEY_FILE=<path-to-your-private-key>
>> >> > >> > SSL_CERT_FILE=<path-to-your-certificate> ./mesos-master
>> >> > >> > <master-flags>
>> >> > >> >
>> >> > >> > MPark.
>> >> > >> >
>> >> > >> > On Thu, Aug 6, 2015 at 9:30 AM craig w <[email protected]>
>> >> > >> > wrote:
>> >> > >> >>
>> >> > >> >> I've run ldd on /usr/sbin/mesos-master (on CentOS 7 using mesos
>> >> > >> >> 0.23
>> >> > >> >> from
>> >> > >> >> mesosphere repo) and I see "libssl.3.so" and "libssl.so.10"
>> >> > >> >>
>> >> > >> >> On Thu, Aug 6, 2015 at 12:20 PM, Jeff Schroeder
>> >> > >> >> <[email protected]> wrote:
>> >> > >> >>>
>> >> > >> >>> Can you run ldd on the mesos-master or mesos-slave binaries? I
>> >> > >> >>> believe
>> >> > >> >>> you *should* see openssl libraries in the output if those
>> >> > >> >>> packages are
>> >> > >> >>> configured using --enable-ssl.
>> >> > >> >>>
>> >> > >> >>> On Thu, Aug 6, 2015 at 9:46 AM, Dharmit Shah
>> >> > >> >>> <[email protected]>
>> >> > >> >>> wrote:
>> >> > >> >>>>
>> >> > >> >>>> Hello,
>> >> > >> >>>>
>> >> > >> >>>> I followed Mesos cluster setup guide on the Mesosphere
>> >> > >> >>>> website
>> >> > >> >>>> [1]. I
>> >> > >> >>>> set it up on a CentOS 7 system. For installation of packages,
>> >> > >> >>>> I
>> >> > >> >>>> went
>> >> > >> >>>> with Mesosphere provided repositories.
>> >> > >> >>>>
>> >> > >> >>>> Now that Mesos 0.23 has been released with SSL capabilities,
>> >> > >> >>>> I
>> >> > >> >>>> believe
>> >> > >> >>>> it is possible to have communication between the master,
>> >> > >> >>>> slaves
>> >> > >> >>>> and
>> >> > >> >>>> frameworks be secured by SSL. Am I right?
>> >> > >> >>>>
>> >> > >> >>>> I would like to set it up in my environment. I am using
>> >> > >> >>>> `mesos-0.23.0-1.0.centos701406.x86_64`.
>> >> > >> >>>>
>> >> > >> >>>> The official Mesos documentation on the topic [2] illustrates
>> >> > >> >>>> how
>> >> > >> >>>> things can be setup when building Mesos from source.
>> >> > >> >>>>
>> >> > >> >>>> I would like to know if Mesos package shipped by Mesosphere
>> >> > >> >>>> repo
>> >> > >> >>>> has
>> >> > >> >>>> this feature or not yet? I tried setting
>> >> > >> >>>> `/etc/mesos-master/ssl_enabled` on one of the master nodes.
>> >> > >> >>>> But
>> >> > >> >>>> restarting `mesos-master` service failed stating that option
>> >> > >> >>>> `ssl_enabled` is unknown.
>> >> > >> >>>>
>> >> > >> >>>> Thanks for your help!
>> >> > >> >>>>
>> >> > >> >>>> [1]
>> >> > >> >>>>
>> >> > >> >>>> http://open.mesosphere.com/getting-started/datacenter/install/
>> >> > >> >>>> [2] http://mesos.apache.org/documentation/latest/mesos-ssl/
>> >> > >> >>>>
>> >> > >> >>>> Regards,
>> >> > >> >>>> Dharmit.
>> >> > >> >>>
>> >> > >> >>>
>> >> > >> >>>
>> >> > >> >>>
>> >> > >> >>> --
>> >> > >> >>> Jeff Schroeder
>> >> > >> >>>
>> >> > >> >>> Don't drink and derive, alcohol and analysis don't mix.
>> >> > >> >>> http://www.digitalprognosis.com
>> >> > >> >>
>> >> > >> >>
>> >> > >> >>
>> >> > >> >>
>> >> > >> >> --
>> >> > >> >>
>> >> > >> >> https://github.com/mindscratch
>> >> > >> >> https://www.google.com/+CraigWickesser
>> >> > >> >> https://twitter.com/mind_scratch
>> >> > >> >> https://twitter.com/craig_links
>> >> > >
>> >> > >
>> >> > >
>> >> > > --
>> >> > > Text by Jeff, typos by iPhone
>> >> >
>> >> >
>> >
>> >
>
>

Reply via email to