no suggestions?

On Tue, Aug 11, 2015 at 6:47 PM, Vinod Kone <[email protected]> wrote:
> @joris, can you help out here?
>
> On Tue, Aug 11, 2015 at 9:43 AM, Carlos Sanchez <[email protected]> wrote:
>>
>> I have tried to enable SSL with no success, even compiling from source
>> with the ssl flags --enable-libevent --enable-ssl
>>
>> export SSL_ENABLED=true
>> export SSL_SUPPORT_DOWNGRADE=false
>> export SSL_REQUIRE_CERT=true
>> export SSL_CERT_FILE=/etc/mesos/...
>> export SSL_KEY_FILE=/etc/mesos/...
>> export SSL_CA_FILE=/etc/mesos/...
>>
>>
>> /home/ubuntu/mesos-deb-packaging/mesos-repo/build/src/mesos-master
>> --work_dir="/var/lib/mesos"
>>
>> Port 5050 is still served as plain http, no SSL
>>
>> Nothing about ssl shows up in the logs, any ideas?
>>
>> Thanks
>>
>>
>> >
>> > From: Dharmit Shah <[email protected]>
>> > To: [email protected]
>> > Cc:
>> > Date: Mon, 10 Aug 2015 14:13:04 +0530
>> > Subject: Re: SSL in Mesos 0.23
>> > Hi Jeff,
>> >
>> > Thanks for the suggestion.
>> >
>> > I modified the systemd service file to use
>> > `/etc/sysconfig/mesos-master` and `/etc/sysconfig/mesos-slave` as
>> > environment files for master and slave services respectively. In these
>> > files, I specified the environment variables that I used to specify on
>> > the command line.
>> >
>> > Now if I check `strings /proc/<pid>/environ | grep SSL` for pids of
>> > master and slave services, I see the environment variables that I set
>> > in the /etc/sysconfig/<environment-file>.
>> >
>> > Now that it looks like I have started the master and slave services
>> > with SSL enabled, how do I really confirm that communication between
>> > master and slaves is really happening over SSL?
>> >
>> > Also, how do I enable SSL communication for a framework like Marathon?
>> >
>> > Regards,
>> > Dharmit.
>> >
>> > On Fri, Aug 7, 2015 at 10:56 PM, Jeff Schroeder
>> > <[email protected]> wrote:
>> > > The sudo command defaults to envreset (look for that in the man page)
>> > > which
>> > > strips all env variables sans a select few. I'd almost bet that your
>> > > SSL_*
>> > > variables are not present and were not passed to the slave. Just sudo
>> > > -i and
>> > > start the slaves *as root* without sudo. There is no benefit to
>> > > starting
>> > > them with sudo. You can verify what I'm saying with something along
>> > > the
>> > > lines of:
>> > >
>> > > strings /proc/$(pidof mesos-slave)/environ | grep ^SSL_
>> > >
>> > >
>> > > On Friday, August 7, 2015, Dharmit Shah <[email protected]> wrote:
>> > >>
>> > >> Hello again,
>> > >>
>> > >> Thanks for your responses. I will share what I tried after your
>> > >> suggestions.
>> > >>
>> > >> 1. `ldd /usr/sbin/mesos-master` and `ldd /usr/sbin/mesos-slave`
>> > >> returned similar output as one suggested by Craig. So, I guess, the
>> > >> Mesosphere repo binaries have SSL enabled. Right?
>> > >>
>> > >> 2. I created SSL private key and cert on one system in my cluster by
>> > >> referring this guide on DO [1]. Admittedly, my knowledge of SSL is
>> > >> limited.
>> > >>
>> > >> 3. Next, I copied the key and cert to all three mesos-master nodes
>> > >> and
>> > >> four mesos-slave nodes. Shouldn't slave nodes be provided only with
>> > >> the cert and not the private key? Whereas all master nodes may have
>> > >> the private key and cert both. Or am I understanding SSL incorrectly
>> > >> here?
>> > >>
>> > >> 4. After copying the cert and key, I started the mesos-master service
>> > >> on master nodes with below command:
>> > >>
>> > >>     $ sudo SSL_ENABLED=true SSL_KEY_FILE=~/ssl/mesos.key
>> > >> SSL_CERT_FILE=~/ssl/mesos.crt /usr/sbin/mesos-master
>> > >>
>> > >> --zk=zk://172.19.10.111:2181,172.19.10.112:2181,172.19.10.193:2181/mesos
>> > >> --port=5050 --log_dir=/var/log/mesos --acls=file:///root/acls.json
>> > >> --credentials=/home/isys/mesos --quorum=2 --work_dir=/var/lib/mesos
>> > >>
>> > >> I check web UI and things look good. I am not completely sure if
>> > >> "https" should have worked for mesos web UI but, it didn't.
>> > >>
>> > >> 5. Next, I start slave nodes with below command:
>> > >>
>> > >>   $ sudo SSL_ENABLED=true SSL_CERT_FILE=~/mesos.crt
>> > >> SSL_KEY_FILE=~/mesos.key /usr/sbin/mesos-slave
>> > >>
>> > >>
>> > >> --master=zk://172.19.10.111:2181,172.19.10.112:2181,172.19.10.193:2181/mesos
>> > >> --log_dir=/var/log/mesos --containerizers=docker,mesos
>> > >> --executor_registration_timeout=15mins
>> > >>
>> > >> Mesos web UI reported four mesos-slave nodes in "Activated" mode. So
>> > >> far so good. I am still wondering how I should verify if
>> > >> communication
>> > >> is happening over SSL.
>> > >>
>> > >> 6. To check if SSL is indeed working, I stopped one slave node and
>> > >> started it without SSL using `systemctl start mesos-slave`. I was
>> > >> expecting it to not get into "Activated" state on Mesos web UI but it
>> > >> did. So, I think SSL is not configured properly by me.
>> > >>
>> > >> I am attaching logs from the master nodes. These logs were generated
>> > >> after starting masters with command specified in point 4.
>> > >>
>> > >> Let me know if I am doing something wrong or if you need more logs or
>> > >> need me to execute some specific commands.
>> > >>
>> > >> [1]
>> > >>
>> > >> https://www.digitalocean.com/community/tutorials/openssl-essentials-working-with-ssl-certificates-private-keys-and-csrs
>> > >>
>> > >> Regards,
>> > >> Dharmit.
>> > >>
>> > >> On Fri, Aug 7, 2015 at 2:52 AM, Michael Park <[email protected]>
>> > >> wrote:
>> > >> > Hi Dharmit,
>> > >> >
>> > >> > I'm not certain whether the Mesosphere deb packages have SSL
>> > >> > enabled or
>> > >> > not,
>> > >> > although based on Craig's observation it looks like it is.
>> > >> >
>> > >> > I think the correct way to enable SSL is to set the SSL_ENABLED
>> > >> > environment
>> > >> > variable, rather than /etc/mesos-master/ssl_enabled. Of course,
>> > >> > along
>> > >> > with
>> > >> > the rest of the SSL_ environment variables.
>> > >> >
>> > >> > e.g. SSL_ENABLED=true SSL_KEY_FILE=<path-to-your-private-key>
>> > >> > SSL_CERT_FILE=<path-to-your-certificate> ./mesos-master
>> > >> > <master-flags>
>> > >> >
>> > >> > MPark.
>> > >> >
>> > >> > On Thu, Aug 6, 2015 at 9:30 AM craig w <[email protected]> wrote:
>> > >> >>
>> > >> >> I've run ldd on /usr/sbin/mesos-master (on CentOS 7 using mesos
>> > >> >> 0.23
>> > >> >> from
>> > >> >> mesosphere repo) and I see "libssl.3.so" and "libssl.so.10"
>> > >> >>
>> > >> >> On Thu, Aug 6, 2015 at 12:20 PM, Jeff Schroeder
>> > >> >> <[email protected]> wrote:
>> > >> >>>
>> > >> >>> Can you run ldd on the mesos-master or mesos-slave binaries? I
>> > >> >>> believe
>> > >> >>> you *should* see openssl libraries in the output if those
>> > >> >>> packages are
>> > >> >>> configured using --enable-ssl.
>> > >> >>>
>> > >> >>> On Thu, Aug 6, 2015 at 9:46 AM, Dharmit Shah
>> > >> >>> <[email protected]>
>> > >> >>> wrote:
>> > >> >>>>
>> > >> >>>> Hello,
>> > >> >>>>
>> > >> >>>> I followed Mesos cluster setup guide on the Mesosphere website
>> > >> >>>> [1]. I
>> > >> >>>> set it up on a CentOS 7 system. For installation of packages, I
>> > >> >>>> went
>> > >> >>>> with Mesosphere provided repositories.
>> > >> >>>>
>> > >> >>>> Now that Mesos 0.23 has been released with SSL capabilities, I
>> > >> >>>> believe
>> > >> >>>> it is possible to have communication between the master, slaves
>> > >> >>>> and
>> > >> >>>> frameworks be secured by SSL. Am I right?
>> > >> >>>>
>> > >> >>>> I would like to set it up in my environment. I am using
>> > >> >>>> `mesos-0.23.0-1.0.centos701406.x86_64`.
>> > >> >>>>
>> > >> >>>> The official Mesos documentation on the topic [2] illustrates
>> > >> >>>> how
>> > >> >>>> things can be setup when building Mesos from source.
>> > >> >>>>
>> > >> >>>> I would like to know if Mesos package shipped by Mesosphere repo
>> > >> >>>> has
>> > >> >>>> this feature or not yet? I tried setting
>> > >> >>>> `/etc/mesos-master/ssl_enabled` on one of the master nodes. But
>> > >> >>>> restarting `mesos-master` service failed stating that option
>> > >> >>>> `ssl_enabled` is unknown.
>> > >> >>>>
>> > >> >>>> Thanks for your help!
>> > >> >>>>
>> > >> >>>> [1]
>> > >> >>>> http://open.mesosphere.com/getting-started/datacenter/install/
>> > >> >>>> [2] http://mesos.apache.org/documentation/latest/mesos-ssl/
>> > >> >>>>
>> > >> >>>> Regards,
>> > >> >>>> Dharmit.
>> > >> >>>
>> > >> >>>
>> > >> >>>
>> > >> >>>
>> > >> >>> --
>> > >> >>> Jeff Schroeder
>> > >> >>>
>> > >> >>> Don't drink and derive, alcohol and analysis don't mix.
>> > >> >>> http://www.digitalprognosis.com
>> > >> >>
>> > >> >>
>> > >> >>
>> > >> >>
>> > >> >> --
>> > >> >>
>> > >> >> https://github.com/mindscratch
>> > >> >> https://www.google.com/+CraigWickesser
>> > >> >> https://twitter.com/mind_scratch
>> > >> >> https://twitter.com/craig_links
>> > >
>> > >
>> > >
>> > > --
>> > > Text by Jeff, typos by iPhone
>> >
>> >
>
>

Reply via email to