Hello Jon, I would install Metron not directly on OSX but instead in a VM.
By the way, here you are the information: Hardware Overview: Model Name: MacBook Pro Model Identifier: MacBookPro5,3 Processor Name: Intel Core 2 Duo Processor Speed: 2,66 GHz Number of Processors: 1 Total Number of Cores: 2 L2 Cache: 3 MB Memory: 8 GB Bus Speed: 1,07 GHz Boot ROM Version: MBP53.00AC.B03 SMC Version (system): 1.48f2 What do you need exactly to knwo? Best Regards, Simone > Il 13 giugno 2017 alle 14.11 "[email protected]" <[email protected]> ha scritto: > > Can you provide more specifics regarding your system? What exactly is > the machine? Just the information on the first page of this > https://support.apple.com/en-us/HT203001 would be necessary to start. > > Jon > > On Tue, Jun 13, 2017 at 8:02 AM <[email protected] mailto:[email protected] > > wrote: > > > > > > Is there any workaround to avoid EFI update? > > > > Best Regards, > > > > Simone > > > > > > > Il 13 giugno 2017 alle 13.58 "[email protected]" > > <[email protected] mailto:[email protected] > ha scritto: > > > > > > > > > Actually, based on the output of that command, it is showing > > > that your endpoint does support virtualization. It is the "VMX" feature > > > - can you try to follow the below steps to enable it, assuming it's > > > disabled? > > > > > > https://support.apple.com/en-us/HT203296 > > > > > > Jon > > > > > > > > > On Tue, Jun 13, 2017, 6:40 AM <[email protected] > > > mailto:[email protected] > wrote: > > > > > > > > > > > > > > Hello Jon, > > > > > > > > here you are the output on my MacBook > > > > > > > > sysctl -a | grep machdep.cpu.features > > > > > > > > > > > > machdep.cpu.features: FPU VME DE PSE TSC MSR PAE > > > > MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE > > > > SSE2 SS HTT TM PBE SSE3 DTES64 MON DSCPL VMX SMX EST TM2 SSSE3 CX16 TPR > > > > PDCM SSE4.1 XSAVE > > > > > > > > I add as I wrote in my previous posts that > > > > unfortunately my machine does not support virtualization. > > > > > > > > I don't know if Metron single node on a VM Centos 6 can > > > > run without virtualization, otherwise I see only AWS as solution to > > > > start using Metron. > > > > > > > > Any suggestion? > > > > > > > > Thanks. > > > > > > > > Best regards, > > > > > > > > Simone > > > > > > > > > > > > > Il 13 giugno 2017 alle 12.20 > > > > "[email protected]" <[email protected] mailto:[email protected] > ha > > > > scritto: > > > > > > > > > > > > > > > Hi Simone, > > > > > > > > > > Can you provide the output of this command on > > > > > your computer? > > > > > > > > > > sysctl -a | grep machdep.cpu.features > > > > > > > > > > There is also an IRC channel, #apache-metron on > > > > > Freenode if you'd like to discuss this more synchronously. I'm > > > > > usually there between 9-5, UTC -4. > > > > > > > > > > Jon > > > > > > > > > > > > > > > On Tue, Jun 13, 2017, 12:59 AM <[email protected] > > > > > mailto:[email protected] > wrote: > > > > > > > > > > > > > > > > > > > > > > Hello Matt, > > > > > > > > > > > > please do not misunderstand me posts. > > > > > > > > > > > > I said that most of the issues are due to > > > > > > my low knowledge of this tool. > > > > > > > > > > > > On the other hand, for a new user that does > > > > > > not have HDP installed, it's quite laborious the installation. For > > > > > > that reason, I'm asking for a work around such as a Centos VM - > > > > > > demo that I can simply run. > > > > > > > > > > > > I know that Metron is a quite new tool so > > > > > > developers do not want to waste their time on that. But it would > > > > > > expand the number of new usres. > > > > > > > > > > > > At the end of the day, I started to read > > > > > > about this tool because I would perform some tests with ML > > > > > > algorithms but I'm still at the installation point. > > > > > > > > > > > > Best Regards, > > > > > > Simone > > > > > > > > > > > > > > > > > > > Il 13 giugno 2017 alle > > > > > > 2.20 Matt Foley <[email protected] > > > > > > mailto:[email protected] > ha scritto: > > > > > > > > > > > > > > > > > > > > > This is funny/sad, because our > > > > > > > Vagrant scripts, that you assert you cannot use, were intended to > > > > > > > meet this need. You can’t get much simpler than “vagrant up” to > > > > > > > install a full-blown single-node Metron. > > > > > > > > > > > > > > > > > > > > > > > > > > > > From: Otto Fowler > > > > > > > <[email protected] mailto:[email protected] > > > > > > > > Date: Monday, June 12, 2017 at 1:24 PM > > > > > > > To: "[email protected] > > > > > > > mailto:[email protected] " <[email protected] > > > > > > > mailto:[email protected] >, Matt Foley <[email protected] > > > > > > > mailto:[email protected] >, "[email protected] > > > > > > > mailto:[email protected] " <[email protected] > > > > > > > mailto:[email protected] > > > > > > > > Subject: Re: Metron current version > > > > > > > and Docker > > > > > > > > > > > > > > > > > > > > > > > > > > > > I do not know of any outside of our > > > > > > > vagrant scripts, that use ansible to deploy Metron onto a centos > > > > > > > virtual box vm. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On June 12, 2017 at 08:12:44, > > > > > > > [email protected] mailto:[email protected] ([email protected] > > > > > > > mailto:[email protected] ) wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hello Otto, > > > > > > > > > > > > > > > > is there any VM Centos 6 with > > > > > > > > Metron installed that I can use for my tests with ML? > > > > > > > > > > > > > > > > Thanks. > > > > > > > > > > > > > > > > Simone > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Il 12 giugno 2017 alle > > > > > > > > > 14.05 Otto Fowler <[email protected] > > > > > > > > > mailto:[email protected] > ha scritto: > > > > > > > > > > > > > > > > > > We use centos 6 for our > > > > > > > > > images and most deployments. There are guides in the works > > > > > > > > > for centos 7 manual setup with ambari in the works right now. > > > > > > > > > Centos 7 is not supported by the full ansible setup at this > > > > > > > > > time. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On June 12, 2017 at > > > > > > > > > 06:08:40, [email protected] mailto:[email protected] > > > > > > > > > ([email protected] mailto:[email protected] ) wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hello, > > > > > > > > > > > > > > > > > > > > I tried to install > > > > > > > > > > Metron 0.3.1 following the guideline: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://community.hortonworks.com/content/kbentry/88843/manually-installing-apache-metron-on-ubuntu-1404.html > > > > > > > > > > > > > > > > > > > > but I got some > > > > > > > > > > errors. > > > > > > > > > > > > > > > > > > > > One question about > > > > > > > > > > where I could find HDP 2.5.0 installation guideline for > > > > > > > > > > Ubuntu. > > > > > > > > > > > > > > > > > > > > Finally, if you as > > > > > > > > > > community and developers of Metron use CentOS 7, maybe it > > > > > > > > > > would be better if I adapt myself to that distribution. > > > > > > > > > > > > > > > > > > > > So, is there any > > > > > > > > > > ContOS 7 VM ready that I could download to test Metron > > > > > > > > > > 0.3.1 and the MaaS option? > > > > > > > > > > > > > > > > > > > > Maybe it would be > > > > > > > > > > faster than debug the installation in Ubuntu. > > > > > > > > > > > > > > > > > > > > Thank you. > > > > > > > > > > > > > > > > > > > > Best Regards, > > > > > > > > > > Simone > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Il 9 giugno > > > > > > > > > > > 2017 alle 2.09 Otto Fowler <[email protected] > > > > > > > > > > > mailto:[email protected] > ha scritto: > > > > > > > > > > > > > > > > > > > > > > Sorry, I do > > > > > > > > > > > not know, we use centos. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On June 8, > > > > > > > > > > > 2017 at 18:12:50, [email protected] > > > > > > > > > > > mailto:[email protected] ([email protected] > > > > > > > > > > > mailto:[email protected] ) wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hello > > > > > > > > > > > > Otto, > > > > > > > > > > > > > > > > > > > > > > > > thanks > > > > > > > > > > > > for the link. > > > > > > > > > > > > > > > > > > > > > > > > Do you > > > > > > > > > > > > know if it does work also with Ubuntu 16.04? > > > > > > > > > > > > > > > > > > > > > > > > Just > > > > > > > > > > > > for curiosity, the post is quite recent but I do not > > > > > > > > > > > > understand the reason to use a distribution quite old. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Finally, I read in that guide that they do not use NIFI > > > > > > > > > > > > as source to record network packet. > > > > > > > > > > > > > > > > > > > > > > > > Is > > > > > > > > > > > > there any guide to use NIFI with Metron? > > > > > > > > > > > > > > > > > > > > > > > > Best > > > > > > > > > > > > Regards, > > > > > > > > > > > > > > > > > > > > > > > > Simone > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Il 8 giugno 2017 alle 22.25 Otto Fowler > > > > > > > > > > > > > <[email protected] > > > > > > > > > > > > > mailto:[email protected] > ha scritto: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://community.hortonworks.com/content/kbentry/88843/manually-installing-apache-metron-on-ubuntu-1404.html > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On June 8, 2017 at 15:46:09, [email protected] > > > > > > > > > > > > > mailto:[email protected] ([email protected] > > > > > > > > > > > > > mailto:[email protected] ) wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hello Matt, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > thanks for your email. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yes, I said that I would use an Ubuntu VM to > > > > > > > > > > > > > > install Metron. I'm old school and I'm not so > > > > > > > > > > > > > > familiar with Docker. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Moreover, it seems that my CPU (MacBook) does > > > > > > > > > > > > > > not support virtualization. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On the other hand, I don't know if a VM with > > > > > > > > > > > > > > CentOS 7 on my machine could run Docker. I mean due > > > > > > > > > > > > > > to the same problem of virtualization on the host > > > > > > > > > > > > > > CPU. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Let assume that VM CentOS 7 support Docker, I'm > > > > > > > > > > > > > > not familiar with that distribution (I used several > > > > > > > > > > > > > > but never CentOS). Do you have rpm packages for the > > > > > > > > > > > > > > tools needed for Metron? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I would use the 0.4.0 version, but after > > > > > > > > > > > > > > several day I'm a bit frustrated because I stil > > > > > > > > > > > > > > didn't completely understand the tools chain to run > > > > > > > > > > > > > > Metron. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I asked also into the dev-mailing list. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > My idea was to install NIFI as probe to catch > > > > > > > > > > > > > > network packets and fill in those into Metron. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Then, I still didn't understand where I should > > > > > > > > > > > > > > deploy ML model into Metron to run it as a service. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > And finally, how to moidfy the ML to include it > > > > > > > > > > > > > > into a RESTful app. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm sorry for the long list of > > > > > > > > > > > > > > questions/issues. I knwo that it is not so elegant > > > > > > > > > > > > > > into a mailing list but I'm a step from give up > > > > > > > > > > > > > > Metron. Even if I know that it would be a mistake. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks again if you could give some indications. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Simone > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Il 8 giugno 2017 alle 20.40 Matt Foley > > > > > > > > > > > > > > > <[email protected] mailto:[email protected] > ha > > > > > > > > > > > > > > > scritto: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Simone, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > If I recall your previous email, you > > > > > > > > > > > > > > > said you want to use an Ubuntu VM. Can you use > > > > > > > > > > > > > > > Centos 6 or 7 instead? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The reason I ask is that for Centos > > > > > > > > > > > > > > > there is an “Ambari manual install” procedure, > > > > > > > > > > > > > > > which does not require Docker, Vagrant, or > > > > > > > > > > > > > > > Ansible on the server. In this scenario you just > > > > > > > > > > > > > > > install Docker on your development machine (I use > > > > > > > > > > > > > > > a Mac), build the Metron RPMs and Ambari MPack > > > > > > > > > > > > > > > there, scp them to the server, and proceed with > > > > > > > > > > > > > > > Ambari install. This is in fact my main lab test > > > > > > > > > > > > > > > method. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > But with Ubuntu, I’m not aware of a > > > > > > > > > > > > > > > documented procedure for Ambari manual install, > > > > > > > > > > > > > > > only install with Ansible playbooks combined with > > > > > > > > > > > > > > > a Docker-based build. You’d have to figure out > > > > > > > > > > > > > > > for yourself how to generate an ‘apt’ package, > > > > > > > > > > > > > > > etc., instead. Perhaps other community members > > > > > > > > > > > > > > > with more Ubuntu experience could assist here. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Regarding 0.4.0 vs 0.3.1: At this > > > > > > > > > > > > > > > point, 0.3.1 is several months old, from Feb 23. > > > > > > > > > > > > > > > There have been about 140 commits since then, > > > > > > > > > > > > > > > including both bug fixes and feature > > > > > > > > > > > > > > > developments. However, I don’t think there have > > > > > > > > > > > > > > > been major changes in the MaaS feature. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --Matt > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > From: "[email protected] > > > > > > > > > > > > > > > mailto:[email protected] " <[email protected] > > > > > > > > > > > > > > > mailto:[email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Reply-To: "[email protected] > > > > > > > > > > > > > > > mailto:[email protected] " > > > > > > > > > > > > > > > <[email protected] > > > > > > > > > > > > > > > mailto:[email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Date: Thursday, June 8, 2017 at 3:19 AM > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > To: "[email protected] > > > > > > > > > > > > > > > mailto:[email protected] " > > > > > > > > > > > > > > > <[email protected] > > > > > > > > > > > > > > > mailto:[email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Subject: Metron current version and > > > > > > > > > > > > > > > Docker > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Dear All, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm newbe with Metron and actually I'm > > > > > > > > > > > > > > > just figure out how to install it to perform some > > > > > > > > > > > > > > > tests. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Currently, I would start installing > > > > > > > > > > > > > > > Metron in a single VM to do my tests. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I don't know which are the differences > > > > > > > > > > > > > > > between 0.3.1 and 0.4.0. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Unfortunately for me, my CPU does not > > > > > > > > > > > > > > > support virtualization. That means > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > that I cannot use Docker. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The only workaround that I found is to > > > > > > > > > > > > > > > use AWS directly but for me that I > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > have never used Mentor it could be a so > > > > > > > > > > > > > > > big step... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > So the question is, do I lose many > > > > > > > > > > > > > > > things if I start with Mentor 0.3.1 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > into a single VM without Docker? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best regards, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Simone > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > Jon > > > > > > > > > > > > > > > > > > > > > -- > > > > > > Jon > > > > > > > > > > > -- > > Jon >
