please do not write direct emails I'm not sure I can understand your question red5sip performs audio/video transcoding between OM and Asterisk I never tried to have all 3 on different servers
On Wed, Sep 23, 2015 at 8:28 PM, Awotipe Oluwaseun < [email protected]> wrote: > Hello, > Thanks for the last explanation, as for red5 sip transport setup ,is the > red5sip package going to download to openmeetings server or asterisk > server, I have my asterisk setup in different server. > Thank for your kindness. > > oluwaseun > On Sep 14, 2015 11:15 PM, Maxim Solodovnik <[email protected]> wrote: > > Hello Awotipe, > > you need to use same DB for OM and Asterisk > hightlighted part is sip-username, the user in Asterisk having rights to > modify the database > > On Mon, Sep 14, 2015 at 9:33 PM, awotipe oluwaseun < > [email protected]> wrote: > > hi maxim, > i do have some specific question, at the asterisk connector config below > > [asterisk-connector]Description = MySQL connection to 'openmeetings' > databaseDriver = MySQLDatabase = openmeetingsServer = localhost > USER = root > PASSWORD =Port = 3306Socket = /var/run/mysqld/mysqld.sock > > where datbase name = openmeetings, my databse name for openmeeting > version 3.06 is open306, is the databsea name were used in the /opt/ > red5/webapps/openmeetings/WEB-INF/classes/openmeetings-applicationContext. > xml > <constructor-arg><value>127.0.0.1</value></constructor-arg> > <constructor-arg><value>5038</value></constructor-arg> > <constructor-arg><value>openmeetings</value></constructor-arg> > <constructor-arg><value>12345</value></constructor-arg> --> > as the colored part of the code. > secondly, asterisk –rx “database show” would be ran after the dia plan > has been configure as in the example. > thanks > > > On Saturday, September 5, 2015 11:40 PM, Maxim Solodovnik < > [email protected]> wrote: > > > To be fair, I don't remember :((( > I performed configuration long ago, but I did exactly what is written on > the configuration page, step by step :)) > I can check existing installation if you have any particulal question :) > > On Fri, Sep 4, 2015 at 8:24 PM, Awotipe Oluwaseun < > [email protected]> wrote: > > Thanks , > One last question, when is the appropriate time to run asterisk -rx > "database show", after all config is done or before diaplan configuration > is done. > Thanks once again > oluwaseun > On Sep 4, 2015 8:46 AM, Maxim Solodovnik <[email protected]> wrote: > > These steps: > > > Update Openmeetings with creadentials for Asterisk manager. Modify > /opt/red5/webapps/openmeetings/WEB-INF/classes/openmeetings-applicationContext.xml > find *<bean id="sipDao" > class="org.apache.openmeetings.db.dao.room.SipDao">* uncomment its > parameters and set it to your custom values. > IMPORTANT: this step should be done *BEFORE* system install/restore > otherwise all SIP related room information will be lost > > > On Fri, Sep 4, 2015 at 7:43 PM, Awotipe Oluwaseun < > [email protected]> wrote: > > Please can you suggest which file on OM that I need to reconfigure, I > follow the instructions as it was writing only the database name changed. > oluwaseun > On Sep 3, 2015 9:49 PM, Maxim Solodovnik <[email protected]> wrote: > > Maybe Asterisk connection on OM side wasn't properly configured? > > On Fri, Sep 4, 2015 at 4:01 AM, awotipe oluwaseun < > [email protected]> wrote: > > thanks smith for your last comment and guildiance, i have some more othaer > questions from the instruction at > > Modify /etc/asterisk/extensions.conf > ; > ***************************************************** > > ; The below dial plan is used to dial into a Openmeetings Conference room; > The first line DB_EXISTS(openmeetings/room/ does not belong to the > openmeetings application but is the name of astDB containing the astDB > family/key pair and values; To Check if your astDB has been created do the > following in a terminal window type the following:; asterisk –rx “database > show”; If you do not receive an output with that resembles > openmeetings/rooms/400## where “##” will equal the extension assigned when > you created your room; If you do not receive the above output check your > parameters in > /opt/red5/webapps/openmeetings/WEB-INF/classes/openmeetings-applicationContext.xml; > Go back into the Administrator Panel and remove the PIN number in each room > save the record with no PIN number and then re-enter the pin again resave the > record.; ***************************************************** > > I ran the command asterisk –rx “database show” before and after iput > the the values of the room state below the screen shot above, i got same > result as below > > > Privilege escalation protection disabled! > > See https://wiki.asterisk.org/wiki/x/1gKfAQ for > more details. > /dundi/secret : > oe+jF4tGLSeIhzY4y6FEOg==;KzAQOOPStj0IOXZW8oMQcg== > /dundi/secretexpiry : 1441320143 > > 2 results found. > > which is different from what is expected, i am runing asterisk 11.70. > Any is there anything that i am doing wrongly here. > thanks > > > > On Thursday, September 3, 2015 10:54 AM, Pierre Smits < > [email protected]> wrote: > > > I wouldn't recommend it for production purposes. There it is best to have > separate setups for OpenMeetings, the RDBMS and the SIP server. But for > evaluation purposes an all-in-one box could suffice. > > As the document states in the section below OEM-prelim-ScreenShot-product > the following line determines the location of the server: > > Server = localhost > > Changing that to the ip address (or fqdn) of the mysql server will make it > use the external rdbms. > > Best regards, > > Pierre Smits > > *ORRTIZ.COM <http://www.orrtiz.com/>* > Services & Solutions for Cloud- > Based Manufacturing, Professional > Services and Retail & Trade > http://www.orrtiz.com > > On Thu, Sep 3, 2015 at 4:11 PM, awotipe oluwaseun < > [email protected]> wrote: > > hi all, > i am trying to integrate sip with my current openmeetings, i got confused > the some steps from the instruction ( > http://openmeetings.apache.org/red5sip-integration_3.0.html ),. > my question is do i have to setup asterisk server separately or it could > be all inone box with openmeeting server, does the Asterisk use exsiting > database on openmeeting server, if so how do i connect it to the databse. > please forgive me for asking a lame man questions. > thanks > > > > > > > > -- > WBR > Maxim aka solomax > > > > > -- > WBR > Maxim aka solomax > > > > > -- > WBR > Maxim aka solomax > > > > > > -- > WBR > Maxim aka solomax > > -- WBR Maxim aka solomax
