Hello Martin, Here are the settings from demo:
53 flash.secure false 54 flash.secure.proxy none 55 flash.video.codec h263 56 flash.video.fps 30 57 flash.video.bandwidth 0 58 flash.cam.quality 90 59 flash.mic.rate 22 60 flash.echoPath 128 I believe these are default ones Your observations show the issue is with Flash video player. Will try to google the topic (unfortunately not earlier than mid of Jul :((( ) Is the demo behaves better? On Wed, Jun 20, 2018 at 12:50 AM Chamberland, Martin < [email protected]> wrote: > "I’m usually using h263 as codec (it uses less CPU, according to my > observations)" > > We tried using the h263 codec but the video feed is stuttering like crazy… > It’s running at about 1-2 fps for the other users (even if I set « > flash.video.fps at 30 or 60). > I’m using my own computer with a webcam and a laptop by my side (with > integrated camera) for testing and even with only 2 users it either > stutters in h263 or h264 creates an evergrowing delay after some time > (1-2h). Is there another setting/key to modify with « flash.video.codec » > to make h263 work without stuttering or reduce the h264 delay? > We checked if the server resources are being maxed out while the stutter > occurs and they are now, everything’s pretty low. > > > "Can you check if latency is reduced if « refresh » button is pressed?" > > (When in H264) Latency is reset when « refresh » is clicked, so everything > works fine again for about 15 minutes and then a 2-3sec delay is already > noticeable. > > > "Is latency the same for 3rd user juste entered the room after other 2 are > broadcasting video for 2-3 hours?" > > The 3rd user entering the room will see no latency for the camera of the 2 > other users (who where already there for a while), but he will start seeing > the same delay after 15-20 minutes. Hitting refresh again here will reset > the delay. > > > Is there some other special settings we should have to make this work? > What are the values used on the demo server for these keys? > > flash.cam.quality = > flash.echoPath = > flash.mic.rate = > flash.secure = > flash.secure.proxy = > flash.video.codec = > flash.video.fps = > > thank's > > Martin C. > -- WBR Maxim aka solomax
