We did a test on the demo server and from what i’v been reporte, there was no problem.
De : Maxim Solodovnik [mailto:[email protected]] Envoyé : 19 juin 2018 22:59 À : Openmeetings user-list Objet : Re: settings for CODECS Hello Martin, Here are the settings from demo: 53 flash.secure false 54 flash.secure.proxy none 55 flash.video.codec h263 56 flash.video.fps 30 57 flash.video.bandwidth 0 58 flash.cam.quality 90 59 flash.mic.rate 22 60 flash.echoPath 128 I believe these are default ones Your observations show the issue is with Flash video player. Will try to google the topic (unfortunately not earlier than mid of Jul :((( ) Is the demo behaves better? On Wed, Jun 20, 2018 at 12:50 AM Chamberland, Martin <[email protected]<mailto:[email protected]>> wrote: "I’m usually using h263 as codec (it uses less CPU, according to my observations)" We tried using the h263 codec but the video feed is stuttering like crazy… It’s running at about 1-2 fps for the other users (even if I set « flash.video.fps at 30 or 60). I’m using my own computer with a webcam and a laptop by my side (with integrated camera) for testing and even with only 2 users it either stutters in h263 or h264 creates an evergrowing delay after some time (1-2h). Is there another setting/key to modify with « flash.video.codec » to make h263 work without stuttering or reduce the h264 delay? We checked if the server resources are being maxed out while the stutter occurs and they are now, everything’s pretty low. "Can you check if latency is reduced if « refresh » button is pressed?" (When in H264) Latency is reset when « refresh » is clicked, so everything works fine again for about 15 minutes and then a 2-3sec delay is already noticeable. "Is latency the same for 3rd user juste entered the room after other 2 are broadcasting video for 2-3 hours?" The 3rd user entering the room will see no latency for the camera of the 2 other users (who where already there for a while), but he will start seeing the same delay after 15-20 minutes. Hitting refresh again here will reset the delay. Is there some other special settings we should have to make this work? What are the values used on the demo server for these keys? flash.cam.quality = flash.echoPath = flash.mic.rate = flash.secure = flash.secure.proxy = flash.video.codec = flash.video.fps = thank's Martin C. -- WBR Maxim aka solomax
