Are you using full secured configuration? (RTMPS?) On Wed, Jun 20, 2018 at 9:43 PM Chamberland, Martin < [email protected]> wrote:
> I will ask the helpdesk techician. But from what he told me, we have a > 100mbps links to the internet. > > The test with the lagging experience was done with a connecton with > himself, i mean 2 computers with 2 camera using the same 100mbps link. > > > > bye > > > > *De :* Maxim Solodovnik [mailto:[email protected]] > *Envoyé :* 20 juin 2018 10:42 > *À :* Openmeetings user-list > *Objet :* Re: settings for CODECS > > > > Maybe this is > > Bandwidth issue? > > WBR, Maxim > (from mobile, sorry for the typos) > > > > On Wed, Jun 20, 2018, 20:32 Chamberland, Martin < > [email protected]> wrote: > > *Yes the demo works perfectly, no stuttering and no delay whatsoever even > after an hour.* > > > > *De :* Maxim Solodovnik [mailto:[email protected]] > *Envoyé :* 19 juin 2018 22:59 > *À :* Openmeetings user-list > *Objet :* Re: settings for CODECS > > > > Hello Martin, > > > > Here are the settings from demo: > > > > 53 > > flash.secure > > false > > 54 > > flash.secure.proxy > > none > > 55 > > flash.video.codec > > h263 > > 56 > > flash.video.fps > > 30 > > 57 > > flash.video.bandwidth > > 0 > > 58 > > flash.cam.quality > > 90 > > 59 > > flash.mic.rate > > 22 > > 60 > > flash.echoPath > > 128 > > > > I believe these are default ones > > > > Your observations show the issue is with Flash video player. Will try to > google the topic (unfortunately not earlier than mid of Jul :((( ) > > > > Is the demo behaves better? > > > > On Wed, Jun 20, 2018 at 12:50 AM Chamberland, Martin < > [email protected]> wrote: > > "I’m usually using h263 as codec (it uses less CPU, according to my > observations)" > > We tried using the h263 codec but the video feed is stuttering like crazy… > It’s running at about 1-2 fps for the other users (even if I set « > flash.video.fps at 30 or 60). > I’m using my own computer with a webcam and a laptop by my side (with > integrated camera) for testing and even with only 2 users it either > stutters in h263 or h264 creates an evergrowing delay after some time > (1-2h). Is there another setting/key to modify with « flash.video.codec » > to make h263 work without stuttering or reduce the h264 delay? > We checked if the server resources are being maxed out while the stutter > occurs and they are now, everything’s pretty low. > > > "Can you check if latency is reduced if « refresh » button is pressed?" > > (When in H264) Latency is reset when « refresh » is clicked, so everything > works fine again for about 15 minutes and then a 2-3sec delay is already > noticeable. > > > "Is latency the same for 3rd user juste entered the room after other 2 are > broadcasting video for 2-3 hours?" > > The 3rd user entering the room will see no latency for the camera of the 2 > other users (who where already there for a while), but he will start seeing > the same delay after 15-20 minutes. Hitting refresh again here will reset > the delay. > > > Is there some other special settings we should have to make this work? > What are the values used on the demo server for these keys? > > flash.cam.quality = > flash.echoPath = > flash.mic.rate = > flash.secure = > flash.secure.proxy = > flash.video.codec = > flash.video.fps = > > thank's > > Martin C. > > > > > -- > > WBR > Maxim aka solomax > > -- WBR Maxim aka solomax
