If your interested and if you have some time left .... I can send you an inventation for a session on my machine .... I can go through the steps .... i hope it happens again ...
On 25/08/2020 19:08, Maxim Solodovnik wrote: > 2 browsers can be used > > On Wed, 26 Aug 2020 at 00:08, Ajay Simha <ajaysi...@gmail.com > <mailto:ajaysi...@gmail.com>> wrote: > > Hi, > > Are you using two different systems for two logins or just one > system with two browser > > > > On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik <solomax...@gmail.com > <mailto:solomax...@gmail.com>> wrote: > > I'll try to test your steps > will take some time .... > > On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat > <kaffeesurro...@posteo.de <mailto:kaffeesurro...@posteo.de>> > wrote: > > Dear List, > > many thanks for your new release. I feel ashamed, that I > have to ask > again and again on this list. > > I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've > followed the > guides from the wiki. > > I can open up my camera and mic. The following is happening: > > > 1) moderator enters the rom while nobody is there (chrome). > 2) second user enters the room. Both enable there camera > and mic. fine > :-) (firefox) > 3) The moderator leaves the room and the second users sees > a message to > be patient until the moderator enters the room again. > 4) moderators reenters the room, both cameras are turned off > 5) second users turns on his camera .... > > quite a few error messages show up, the camera window > is blue and > blank on the second users screen, on the moderator screens i > can see only the questionmarkman ... > > I've attached all of my config files and some screenshots > as png ... > > I did check the coturn server with trickle ... also attached > > I did attache a screen shot of the moderator account, > several mic > symbols on the screen > > The invalidStateError appears on the second users screen > > The RtcPeerConnection on the moderator screen ..... > > > I'm lost .... already double checked my config files and > reread the > installation manuals .... > > > Many thanks, > > kaffeesurogat > > > > -- > Best regards, > Maxim > > > > -- > Best regards, > Maxim