Deear Denis, dear Maxim, dear Alvaro, dear ... oh there are so many ;-) i checked, if this is reproducible. I've made a note of every single step:
1) login user 1 (moderator) 2) user 1 entering private room 3) user 1 turns camera and mic on 4) login user 2 (not a moderator) 5) user 2 is entering private room 6) user 2 requests permissions to use camera and mic 7) user 1 grants permissions to use camera and mic via activities and actions 8) user 2 turns on camera and mic user 1 and user 2 see/hear each other 9) user 1 leaves the room user 2 sees "wait for moderator..." message 10) user 1 re-enters the room wait for moderator dissapears user 1/user 2 cameras/mics off 11) user 1 turns cam/mic back on => user 2 sees user 1 12) user 2 turns cam/mic back on => user 1 does not see user 2 (question mark face ...) => several mic symbols displayed on user 2 - browser for user 2..... see attached pic .... user1 chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux machine user 2 Firefox 79 (64 Bit) Windows 10 user 1 and user 2 both on the same network different machines server ubuntu 18.04 LTS openmeetings ... Version 5.0.0 Revision 422e22f Build date 2020-08-18T00:21:52Z Many thanks again, kaffeesurrogat On 26/08/2020 08:50, Denis Noctor wrote: > @kaffeesurrogat, > > First of all can you confirm that you can see and hear at least 2 users in a > room as it is a little unclear... and if you’ve read my previous email. yes there are two users in the room. the can hear an see each other .... > > I won’t be able to respond immediately as I am on the the other side of the > planet and am heading off to bed... (1.38am)... but I am curious to see if > you have been able to reproduce this scenario more than once... as it is not > very clear from your posts. yes ..... > > The situation you described might be exceptionally rare... as I can’t see the > reason for a moderator to leave a room when others are in it... and as a > result this scenario might be an oversight... but a very small one... taking > meeting protocol into consideration. But I’ve recommended an alternative. > > Hope this helps somewhat. > > Again, it is important to stress that it would be useful to identify server > specs, browser versions and so on. > > All the best, Denis. > > > > > > Sent from my iPhone > >> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat <[email protected]> wrote: >> >> Dear Maxim, dear Alvaro, dear .... >> >> i did use a linux machine and a windows machine to test my setup ..... >> I'm quite shure that I made a config mistake, but which one ? >> >> Many thanks for your testing and trying, >> >> kaffeesurrogat .... >> >>> On 25/08/2020 19:07, Ajay Simha wrote: >>> Hi, >>> >>> Are you using two different systems for two logins or just one system >>> with two browser >>> >>> >>> >>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> I'll try to test your steps >>> will take some time .... >>> >>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat >>> <[email protected] <mailto:[email protected]>> wrote: >>> >>> Dear List, >>> >>> many thanks for your new release. I feel ashamed, that I have >>> to ask >>> again and again on this list. >>> >>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've >>> followed the >>> guides from the wiki. >>> >>> I can open up my camera and mic. The following is happening: >>> >>> >>> 1) moderator enters the rom while nobody is there (chrome). >>> 2) second user enters the room. Both enable there camera and >>> mic. fine >>> :-) (firefox) >>> 3) The moderator leaves the room and the second users sees a >>> message to >>> be patient until the moderator enters the room again. >>> 4) moderators reenters the room, both cameras are turned off >>> 5) second users turns on his camera .... >>> >>> quite a few error messages show up, the camera window is >>> blue and >>> blank on the second users screen, on the moderator screens i >>> can see only the questionmarkman ... >>> >>> I've attached all of my config files and some screenshots as >>> png ... >>> >>> I did check the coturn server with trickle ... also attached >>> >>> I did attache a screen shot of the moderator account, several mic >>> symbols on the screen >>> >>> The invalidStateError appears on the second users screen >>> >>> The RtcPeerConnection on the moderator screen ..... >>> >>> >>> I'm lost .... already double checked my config files and >>> reread the >>> installation manuals .... >>> >>> >>> Many thanks, >>> >>> kaffeesurogat >>> >>> >>> >>> -- >>> Best regards, >>> Maxim >>>
