On 02/08/2018 03:37 PM, Dave Howorth wrote:
On Thu, 8 Feb 2018 11:45:08 -0500
Tim-L <webmas...@krackedpress.com> wrote:
Yes, I tried Insert > Media > Select Source. It does not show my
print/scan/copy - Canon TS9020.
Canon's Linux driver for scanning does not work with xsane. They
call their interface "scangearmp2". This has hardly and options
compared to "scangearmp" which was use for the previous
printer/scanners I have had [all dead now].
scangearmp is a command-line program, not an interface. LibreOffice
uses the SANE backends, just as xsane does, just as pretty much every
other scanning program does. Do you have the sane package installed?
Your scanner is listed as using the sane-pixma driver, but is marked as
untested. See http://www.sane-project.org/sane-mfgs.html#Z-CANON
Generally, buying a scanner or other hardware device for use with linux
is unwise unless it has been tested and reported as compatible. This is
especially true with linux-hostile manufacturers like Canon.
Interesting. IF scangearmp2 needs SANE, then why can it work without
SANE being installed?
I just checked for it. It was not installed. I installed SANE and it
scangearmp2 did not work any different. Still, LO "media scan" option
does not work either.
Actually, I have scangearmp2 as a launcher on my desktop. Since it shows
a GUI window when called, it is not fully command line with all of the
options as parts of the command. I wish the "2" version had all the
options that the original one had. At least it saves JPG instead of
"use with Linux" is something I do search for.
I do so by looking for printers that have Linux drivers coming from the
manufacturer, and not a third party. For Canon, all 4 of the printers
had drivers for DEB based Linux. Usually, I have to go to the Canon UK
site for the drivers. This last one, TS9020, was the first one that had
Linux drivers in the USA site. I found out how much the problem was when
I had an Epson Workflow[?] printer. I could print OK, except for
duplexing. It would not scan at all till I installed Ubuntu 12.04. I
started out with 9.10 on that desktop.
The only printer brand that I get the drivers from a "3rd party" is HP.
They are the easiest to get the drivers, etc.. It seems that their Open
Source driver system will "make" a driver for the specific OS and model
The first 3 Canon PIXMA models I had used used scangearmp. This new one
required "scangearmp2" the newer version - Scan Gear MP 3.40. The old
and new one are not compatible, backwards or forward.
So, "linux-hostile" is not as true as people think. Sure, till now,
Canon's support system tells you that they do not support Linux. This
was for the USA support system. If you went to the UK support site, you
can find the Linux drivers there. Sure, when I bought a Pixma MG6220, I
had to get the MG6240 driver - since it was called MG6200 driver. So I
could buy the Canon printer and get the drivers for Linux.
Also, I make sure I can get third party ink. I cannot afford the Canon
OEM pricing. When I had the MG6220, I could get 6+ full sets of ink for
the same price I would get for 1 OEM set. This new TS9220 set costs
more, but the printer has not been out as long as the others. It is
getting lower in costs though. I can use a lot of ink each month, if I
am doing a lot of "work". So, ink costs are very important for someone
on a fixed [mostly] income.
Yes, I have 64-bit Ubuntu Mate, LibreOffice, and Canon drivers.
On a side note:
This is the first Canon printer that I bought that has Linux drivers
in their USA web site. I always had to go to the UK site to get the
drivers. At least Canon is starting to get the picture that a lot of
people in the USA are Linux users.
On 02/07/2018 07:32 PM, Dave Howorth wrote:
On Wed, 7 Feb 2018 15:27:33 -0800
Girvin Herr <ghe...@fastmail.com> wrote:
I tried it with LO 126.96.36.199 under xfce and Slackware 14.2 Linux with
my Epson 1660 Photo USB scanner and it worked fine with Insert >
Media > Scan > Select Source.
And another datapoint:
I tried with LO 188.8.131.52 under LXDE on openSUSE Leap 42.3 with an
Epson Stylus Photo RX620 and got a 'Due to an unexpected error,
LibreOffice crashed.' (It's one of those annoyingly unhelpful error
dialogs that won't let you copy the text. GRR!)
After restarting LO, it scanned fine. I'll still prefer to use
On 02/07/2018 03:12 PM, Dave Barton wrote:
After seeing Tim's post I checked and Insert > Media > Scan >
Select Source... opens an empty dialog and Insert > Media > Scan >
Request... silently fails.
Version: 184.108.40.206 (x64) Build ID:
64a0f66915f38c6217de274f0aa8e15618924765 CPU threads: 8; OS:
Windows 6.1; UI render: GL;
No issues with scan in either AOO or MS Office on the same
On 07.02.2018 22:50, Joe Conner wrote:
Did you use the menu tree INSERT -> MEDIA -> SCAN?
On 02/07/2018 02:25 PM, Tim-L wrote:
I just installed 220.127.116.11 64-bit DEB for Ubuntu MATE 16.04LTS.
I was looking at some things and I went to
"Insert/Media/Scan/Select Source". LO could not find my Canon
TS9020 printer/scanner. I even opened the printer's scan utility
and still LO could not find the scanner.
This is the first time I looked into using a scanner withing LO,
so I do not know if it is a 6.0.0 issue or 5.4.4 or earlier
To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org
Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette
List archive: https://listarchives.libreoffice.org/global/users/
All messages sent to this list will be publicly archived and cannot be deleted