Am 26.07.2012 um 20:05 schrieb Maes, Richard: > Honestly, I am really unfamiliar with how man pages work behind the > scenes. We installed two separate grids and the problem is showing up > on both (RHEL5 with latest YUM updates), these are the links in my man1 > directory. Notice there are no .gz extensions on the destination which > seems wrong to me. Is that really a problem? In the older, 6.2u4, > there are no .gz's and there doesn't appear to be any symbolic links in > the man1 directory, so something has changed here.
Yes, in former times the submit.1 was just included with a line like: .so man1/submit.1 in qsub.1. Nevertheless, as Dave said, the .gz has to be present at the filename and the linkname or none of them. -- Reuti > -rwxrwxr-x 1 gridadm gridadm 23661 May 31 14:19 submit.1.gz > <- Notice this has a .gz extension. > lrwxrwxrwx 1 gridadm gridadm 15 Jun 12 14:46 gethostbyaddr.1 -> > hostnameutils.1 > lrwxrwxrwx 1 gridadm gridadm 15 Jun 12 14:46 gethostbyname.1 -> > hostnameutils.1 > lrwxrwxrwx 1 gridadm gridadm 15 Jun 12 14:46 gethostname.1 -> > hostnameutils.1 > lrwxrwxrwx 1 gridadm gridadm 15 Jun 12 14:46 getservbyname.1 -> > hostnameutils.1 > lrwxrwxrwx 1 gridadm gridadm 8 Jun 12 14:46 qalter.1 -> submit.1 > <- None of these have the gz extension. > lrwxrwxrwx 1 gridadm gridadm 8 Jun 12 14:46 qlogin.1 -> submit.1 > lrwxrwxrwx 1 gridadm gridadm 8 Jun 12 14:46 qresub.1 -> submit.1 > lrwxrwxrwx 1 gridadm gridadm 8 Jun 12 14:46 qrsh.1 -> submit.1 > lrwxrwxrwx 1 gridadm gridadm 8 Jun 12 14:46 qsh.1 -> submit.1 > lrwxrwxrwx 1 gridadm gridadm 8 Jun 12 14:46 qsub.1 -> submit.1 > > > > -----Original Message----- > From: Reuti [mailto:[email protected]] > Sent: Thursday, July 26, 2012 10:10 AM > To: Maes, Richard > Cc: William Hay; [email protected] > Subject: Re: [gridengine users] 8.1.0 appears to have old manpages. > > Am 26.07.2012 um 18:59 schrieb Maes, Richard: > >> Reuti, >> I verified that a less submit.1.gz provides correct output, but a less >> qsub.1 and qsub.1.gz both fail. Obviously there is only a symbolic >> link of qsub.1 -> submit.1 and there is no qsub.1.gz file or symbolic > >> link at all. > > No I'm lost: the main complaint now is that there are missing links in > the $SGE_ROOT/man tree? > > -- Reuti > > >> -----Original Message----- >> From: Reuti [mailto:[email protected]] >> Sent: Thursday, July 26, 2012 3:43 AM >> To: Maes, Richard >> Cc: William Hay; [email protected] >> Subject: Re: [gridengine users] 8.1.0 appears to have old manpages. >> >> Am 26.07.2012 um 02:14 schrieb Maes, Richard: >> >>> Sorry about rebirthing an old thread, but it's too late to change the > >>> channel now... >>> >>> I finally got around to looking at this man page issue again. I >>> descended to the man1 directory and did a ls -lart (only a partial >>> info shown for brevity) Submit.1.gz is present and qsub.1 is soft >>> linked to it. Note that I perform the groff on the qsub and it >>> returns >> >>> a fatal error below. If I instead run this on submit.1, then I get >>> the 8.1.0 man page as expected. If I perform a 'man submit' then I >>> get the 8.1.0 man page as well, but a man qsub gives me a man page >>> from 2003. Is there some obvious thing about man pages and soft links > >>> that I am missing here? >>> >>> Here is my man path >>> [wagrid03.ciena.com(rmaes)]-> man 117> env |grep MAN >>> MANPATH=/corp/tools/grid/v8_1_0/man:/usr/share/man:/usr/X11R6/man:/us >>> r /l ocal/man:/corp/tools/cadence/ius_8_1/share/man >>> [wagrid03.ciena.com(rmaes)]-> man1 118> ls -lart total 172 -rwxrwxr-x >>> 1 gridadm gridadm 23661 May 31 14:19 submit.1.gz ..... >>> lrwxrwxrwx 1 gridadm gridadm 8 Jun 12 14:46 qrsh.1 -> submit.1 >>> lrwxrwxrwx 1 gridadm gridadm 8 Jun 12 14:46 qsh.1 -> submit.1 >>> lrwxrwxrwx 1 gridadm gridadm 8 Jun 12 14:46 qsub.1 -> submit.1 >>> drwxr-xr-x 6 gridadm gridadm 4096 Jun 13 14:20 .. >>> drwxr-xr-x 2 gridadm gridadm 4096 Jun 13 14:20 . >>> [wagrid03.ciena.com(rmaes)]-> man1 119> groff -Tascii -mandoc qsub >>> troff: fatal error: can't open `qsub': No such file or directory >>> [wagrid03.ciena.com(rmaes)]-> man1 120>groff -Tascii -mandoc qsub.1 >> >> This should work. A `less` with the same file succeeds? >> >> -- Reuti >> >> >>> troff: fatal error: can't open `qsub.1': No such file or directory >>> >>> -----Original Message----- >>> From: Reuti [mailto:[email protected]] >>> Sent: Friday, June 15, 2012 2:55 AM >>> To: William Hay >>> Cc: Maes, Richard; [email protected] >>> Subject: Re: [gridengine users] 8.1.0 appears to have old manpages. >>> >>> Am 15.06.2012 um 10:14 schrieb William Hay: >>> >>>> By check the directories out I mean something like (assuming > Linux): >>>> >>>> cd /corp/tools/grid/v8_1_0/man >>>> groff -Tascii -mandoc man1/qsub.1 |less >>> >>> I get ESCs in the output, "less -R" seems to remove them. >>> >>> >>> In case someone would like to use `man` directly for submit.1: there >>> are two different versions of `man` around, the one on Linux is >>> different than the one on a Mac. >>> >>> For the Linux versions you can also specify a path to a file instead >>> or the command or option -l <name> to avoid the ususal search. >>> >>> On a Mac the option -l doesn't exist and one has to use a path to >>> acces a local file. >>> >>> -- Reuti >>> >>> >>>> This should give you the qsub manpage. NB it is important you do >>>> this >>> >>>> from the directory specified in the manpath rather than the one >>>> containing qsub.1 or any other directory as the SGE qsub.1 manpage >>>> sources man1/submit.1 for its actual text. >>>> >>>> William >>>> >>>> _______________________________________________ >>>> users mailing list >>>> [email protected] >>>> https://gridengine.org/mailman/listinfo/users >>>> >>> >>> >> >> > > _______________________________________________ users mailing list [email protected] https://gridengine.org/mailman/listinfo/users
