it looks like the modems.conf files does not have an entry for your modemtype = "siemens" (i.e. id = siemens). this is why it says modemtype not found. there are entries for specific siemens modemtypes (like siemens_tc35 ) but not one for your specific model nor a generic siemens. this may be your problem.
since the default generic modemtype does not seem to work for you, you may need to create a modems group (group = modems) entry for your specific siemens model, filling in the appropriate config variables (like enable-hwhs, init-string, etc) based on the documentation from your model modem. take a look at the comments at the beginning of the modems.conf file for the various config variable available. also the other siemens modemtypes may give you some clues as to what you need to configure. nick On Wed, 2004-01-21 at 11:28, Aftab Rashid wrote: > Dear Nick, > > First of all it says modemtype not found revert to autodetect, but I > have specified siemens, secondly it goes into loop > > following are the messages, a detailed error log is attached to this email. > 2004-01-21 15:13:01 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:01 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:01 [0] INFO: MAIN: Start-up done, entering mainloop > 2004-01-21 15:13:03 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:03 [6] INFO: AT2[/dev/ttyS0]: closing device > 2004-01-21 15:13:03 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:03 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:03 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:04 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware > handshake > 2004-01-21 15:13:04 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:05 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:05 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:05 [6] INFO: AT2[/dev/ttyS0]: init device > > > Please suggest changes, > > > Regards, > > Aftab > > > -----Original Message----- > From: Nicholas Rahn <[EMAIL PROTECTED]> > To: Aftab Rashid <[EMAIL PROTECTED]> > Cc: [EMAIL PROTECTED] > Date: Wed, 21 Jan 2004 10:56:04 +0100 > Subject: Re: Siemens Modem SMSC > > > i don't see any error in this log. normally, however, you should have > > one more line that says "AT SMSC successfully opened." then you know > > that everything is ok and you can start using it. > > > > nick > > > > > > On Wed, 2004-01-21 at 10:56, Aftab Rashid wrote: > > > Hi Nick, > > > > > > I tried it and got the following error: > > > > > > 2004-01-21 14:47:59 [0] INFO: AT2[/dev/ttyS0]: configuration shows > > > modemtype <siemens> > > > 2004-01-21 14:47:59 [0] INFO: AT2[/dev/ttyS0]: modemtype not found, > > revert > > > to autodetect > > > 2004-01-21 14:47:59 [0] INFO: > > ---------------------------------------- > > > 2004-01-21 14:47:59 [0] INFO: Kannel bearerbox II version > > cvs-20031218 > > > starting > > > 2004-01-21 14:47:59 [0] INFO: MAIN: Start-up done, entering mainloop > > > 2004-01-21 14:47:59 [6] INFO: AT2[/dev/ttyS0]: opening device > > > 2004-01-21 14:47:59 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > > > 2004-01-21 14:48:01 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > > > 2004-01-21 14:48:01 [6] INFO: AT2[/dev/ttyS0]: closing device > > > 2004-01-21 14:48:01 [6] INFO: AT2[/dev/ttyS0]: opening device > > > 2004-01-21 14:48:01 [6] INFO: AT2[/dev/ttyS0]: init device > > > 2004-01-21 14:48:01 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > > > 2004-01-21 14:48:02 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware > > > handshake > > > 2004-01-21 14:48:02 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > > > > > > > > > Regards, > > > > > > > > > Aftab > > > > > > > > > > > > > > > -----Original Message----- > > > From: Nicholas Rahn <[EMAIL PROTECTED]> > > > To: Aftab Rashid <[EMAIL PROTECTED]> > > > Cc: [EMAIL PROTECTED] > > > Date: Wed, 21 Jan 2004 10:10:50 +0100 > > > Subject: Re: Siemens Modem SMSC > > > > > > > you need to include the definition of your modem in the > > configuration > > > > file. the easiest way to do this is by adding this line to your > > > > configuration file: > > > > > > > > include = <path-to-kannel-source>/doc/examples/modems.conf > > > > > > > > this will include the standard modem configurations provided by > > kannel > > > > and should allow you to use your modem right away. > > > > > > > > nick > > > > > > > > > > > > On Wed, 2004-01-21 at 09:01, Aftab Rashid wrote: > > > > > Hi, > > > > > > > > > > I want to use SIEMENS M55 as SMSC. I'm getting the following > > > > message > > > > > > > > > > 2004-01-20 20:00:51 [0] INFO: HTTP: Opening server at port > > 1812. > > > > > 2004-01-20 20:00:51 [0] INFO: AT2[/dev/ttyS0]: configuration > > shows > > > > > modemtype <siemens> > > > > > 2004-01-20 20:00:51 [0] PANIC: Where are the modem definitions > > ?!?! > > > > > 2004-01-20 20:00:51 [0] PANIC: ./bearerbox [0x80a9be9] > > > > > 2004-01-20 20:00:51 [0] PANIC: ./bearerbox [0x805d1a2] > > > > > > > > > > and my conf file is > > > > > group = smsc > > > > > smsc = at > > > > > modemtype = siemens > > > > > device = /dev/ttyS0 > > > > > > > > > > > > > > > Is my mobile compatible with Kannel? If yes, what changes should > > be > > > > made > > > > > in the conf file to make it working. > > > > > > > > > > > > > > > Thanks and regards, > > > > > > > > > > > > > > > Aftab > > > > > > > > > > > > > > > > > > > ______________________________________________________________________ > 2004-01-21 14:47:59 [0] INFO: Debug_lvl = 1, log_file = <none>, log_lvl = 0 > 2004-01-21 14:47:59 [0] WARNING: DLR: using default 'internal' for storage type. > 2004-01-21 14:47:59 [0] INFO: DLR using storage type: internal > 2004-01-21 14:47:59 [0] INFO: Added logfile `/var/log/check_smpp_bb.log' with level > `0'. > 2004-01-21 14:47:59 [0] INFO: HTTP: Opening server at port 1812. > 2004-01-21 14:47:59 [0] INFO: AT2[/dev/ttyS0]: configuration shows modemtype > <siemens> > 2004-01-21 14:47:59 [0] INFO: AT2[/dev/ttyS0]: modemtype not found, revert to > autodetect > 2004-01-21 14:47:59 [0] INFO: ---------------------------------------- > 2004-01-21 14:47:59 [0] INFO: Kannel bearerbox II version cvs-20031218 starting > 2004-01-21 14:47:59 [0] INFO: MAIN: Start-up done, entering mainloop > 2004-01-21 14:47:59 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 14:47:59 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 14:48:01 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 14:48:01 [6] INFO: AT2[/dev/ttyS0]: closing device > 2004-01-21 14:48:01 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 14:48:01 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 14:48:01 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 14:48:02 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 14:48:02 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 14:48:03 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 14:48:03 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 14:48:03 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 14:48:03 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 14:48:03 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 14:48:04 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 14:48:04 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 14:48:04 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 14:48:04 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 14:48:04 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 14:48:04 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 14:48:05 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 14:48:05 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 14:48:05 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 14:48:05 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 14:48:05 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 14:48:06 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 14:48:06 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 14:48:06 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 14:48:06 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 14:48:06 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 14:48:06 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 14:48:07 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 14:48:08 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 14:48:08 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 14:48:08 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 14:48:08 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 14:48:08 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 14:48:08 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 14:48:09 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 14:48:09 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 14:48:09 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 14:48:09 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 14:48:09 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 14:48:10 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 14:48:10 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 14:48:10 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 14:48:10 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 14:48:10 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 14:48:10 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 14:48:11 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 14:48:11 [0] WARNING: Killing signal or HTTP admin command received, > shutting down... > 2004-01-21 14:48:11 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 14:48:12 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 14:48:12 [6] INFO: AT2[/dev/ttyS0]: closing device > 2004-01-21 14:48:12 [0] INFO: All flow threads have died, killing core > 2004-01-21 14:48:12 [0] INFO: Total WDP messages: received 0, sent 0 > 2004-01-21 14:48:12 [0] INFO: Total SMS messages: received 0, sent 0 > [EMAIL PROTECTED] CVS]# ./bearerbox -v 1 smpp.conf > 2004-01-21 15:12:10 [0] INFO: Debug_lvl = 1, log_file = <none>, log_lvl = 0 > 2004-01-21 15:12:10 [0] WARNING: DLR: using default 'internal' for storage type. > 2004-01-21 15:12:10 [0] INFO: DLR using storage type: internal > 2004-01-21 15:12:10 [0] INFO: Added logfile `/var/log/check_smpp_bb.log' with level > `0'. > 2004-01-21 15:12:10 [0] INFO: HTTP: Opening server at port 1812. > 2004-01-21 15:12:10 [0] INFO: AT2[/dev/ttyS0]: configuration shows modemtype > <siemens> > 2004-01-21 15:12:10 [0] INFO: AT2[/dev/ttyS0]: modemtype not found, revert to > autodetect > 2004-01-21 15:12:10 [0] INFO: ---------------------------------------- > 2004-01-21 15:12:10 [0] INFO: Kannel bearerbox II version cvs-20031218 starting > 2004-01-21 15:12:10 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:10 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:10 [0] INFO: MAIN: Start-up done, entering mainloop > 2004-01-21 15:12:12 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:12 [6] INFO: AT2[/dev/ttyS0]: closing device > 2004-01-21 15:12:12 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:12 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:12 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:13 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:13 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:14 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:14 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:14 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:14 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:14 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:15 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:15 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:15 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:15 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:15 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:15 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:16 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:16 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:16 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:16 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:16 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:17 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:17 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:17 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:17 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:17 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:17 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:18 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:19 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:19 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:19 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:19 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:19 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:19 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:20 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:20 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:20 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:20 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:20 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:21 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:21 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:22 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:22 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:22 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:22 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:22 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:23 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:23 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:23 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:23 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:23 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:23 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:24 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:24 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:24 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:24 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:24 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:25 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:25 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:25 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:25 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:25 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:25 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:26 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:26 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:27 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:27 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:27 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:27 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:27 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:28 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:28 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:28 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:28 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:28 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:29 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:29 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:29 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:29 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:29 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:29 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:30 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:30 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:31 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:31 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:31 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:31 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:31 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:32 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:32 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:32 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:32 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:32 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:33 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:33 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:33 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:33 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:33 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:33 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:34 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:34 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:35 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:35 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:35 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:35 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:35 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:36 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:36 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:36 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:36 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:36 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:37 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:37 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:37 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:37 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:37 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:37 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:38 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:38 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:39 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:39 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:39 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:39 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:39 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:40 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:40 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:40 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:40 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:40 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:40 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:41 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:41 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:41 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:41 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:41 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:42 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:42 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:42 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:42 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:42 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:42 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:43 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:44 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:44 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:44 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:44 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:44 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:44 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:45 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:45 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:45 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:45 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:45 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:46 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:46 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:46 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:46 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:46 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:46 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:47 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:47 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:48 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:48 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:12:48 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:12:48 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:12:48 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:12:49 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:12:49 [0] WARNING: Killing signal or HTTP admin command received, > shutting down... > 2004-01-21 15:12:49 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:12:49 [6] INFO: AT2[/dev/ttyS0]: closing device > 2004-01-21 15:12:50 [0] INFO: All flow threads have died, killing core > 2004-01-21 15:12:50 [0] INFO: Total WDP messages: received 0, sent 0 > 2004-01-21 15:12:50 [0] INFO: Total SMS messages: received 0, sent 0 > [EMAIL PROTECTED] CVS]# ./bearerbox -v 1 smpp.conf > log.txt > 2004-01-21 15:13:01 [0] INFO: Debug_lvl = 1, log_file = <none>, log_lvl = 0 > 2004-01-21 15:13:01 [0] WARNING: DLR: using default 'internal' for storage type. > 2004-01-21 15:13:01 [0] INFO: DLR using storage type: internal > 2004-01-21 15:13:01 [0] INFO: Added logfile `/var/log/check_smpp_bb.log' with level > `0'. > 2004-01-21 15:13:01 [0] INFO: HTTP: Opening server at port 1812. > 2004-01-21 15:13:01 [0] INFO: AT2[/dev/ttyS0]: configuration shows modemtype > <siemens> > 2004-01-21 15:13:01 [0] INFO: AT2[/dev/ttyS0]: modemtype not found, revert to > autodetect > 2004-01-21 15:13:01 [0] INFO: ---------------------------------------- > 2004-01-21 15:13:01 [0] INFO: Kannel bearerbox II version cvs-20031218 starting > 2004-01-21 15:13:01 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:01 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:01 [0] INFO: MAIN: Start-up done, entering mainloop > 2004-01-21 15:13:03 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:03 [6] INFO: AT2[/dev/ttyS0]: closing device > 2004-01-21 15:13:03 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:03 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:03 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:04 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:04 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:05 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:05 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:05 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:05 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:05 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:06 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:06 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:06 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:06 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:06 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:06 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:07 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:07 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:07 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:07 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:07 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:08 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:08 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:09 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:09 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:09 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:09 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:09 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:10 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:10 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:10 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:10 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:10 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:10 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:11 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:11 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:11 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:11 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:11 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:12 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:12 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:12 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:12 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:12 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:12 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:13 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:13 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:14 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:14 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:14 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:14 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:14 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:15 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:15 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:15 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:15 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:15 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:16 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:16 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:16 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:16 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:16 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:16 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:17 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:17 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:18 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:18 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:18 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:18 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:18 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:19 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:19 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:19 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:19 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:19 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:20 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:20 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:20 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:20 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:20 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:20 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:21 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:21 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:22 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:22 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:22 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:22 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:22 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:23 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:23 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:23 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:23 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:23 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:23 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:24 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:24 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:24 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:24 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:24 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:25 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:25 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:26 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:26 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:26 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:26 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:26 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:27 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:27 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:27 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:27 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:27 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:27 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:28 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:28 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:28 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:28 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:28 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:29 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:29 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:30 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:30 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:30 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:30 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:30 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:31 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:31 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:31 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:31 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:31 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:31 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:32 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:32 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:32 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:32 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:32 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:33 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:33 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:33 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:33 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:33 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:33 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:34 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:34 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:35 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:35 [6] INFO: AT2[/dev/ttyS0]: opening device > 2004-01-21 15:13:35 [6] INFO: AT2[/dev/ttyS0]: init device > 2004-01-21 15:13:35 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 > 2004-01-21 15:13:35 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake > 2004-01-21 15:13:35 [0] WARNING: Killing signal or HTTP admin command received, > shutting down... > 2004-01-21 15:13:36 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported > 2004-01-21 15:13:36 [6] ERROR: AT2[/dev/ttyS0]: Opening failed. Terminating > 2004-01-21 15:13:36 [6] INFO: AT2[/dev/ttyS0]: closing device > 2004-01-21 15:13:36 [0] INFO: All flow threads have died, killing core > 2004-01-21 15:13:36 [0] INFO: Total WDP messages: received 0, sent 0 > 2004-01-21 15:13:36 [0] INFO: Total SMS messages: received 0, sent 0 >
