|
Dear Rashid,
Could you please post your step to fix your problem
?
Sincerely
-bino-
----- Original Message -----
Sent: Wednesday, January 21, 2004 7:11
PM
Subject: Re: Siemens Modem SMSC
I Got it, "2004-01-21 17:02:23 [6] INFO: AT2[M55]: AT SMSC
successfully opened."
Thanks to all
Regards,
Aftab Rashid
-----Original
Message-----
From: Nicholas Rahn <[EMAIL PROTECTED]>
To:
Aftab Rashid <[EMAIL PROTECTED]>
Cc: [EMAIL PROTECTED]
Date: Wed, 21 Jan 2004
12:07:28 +0100
Subject: Re: Siemens Modem SMSC
> it looks
like the modems.conf files does not have an entry for your
> modemtype =
"siemens" (i.e. id = siemens). this is why it says
> modemtype not
found. there are entries for specific siemens modemtypes
> (like
siemens_tc35 ) but not one for your specific model nor a generic
>
siemens. this may be your problem.
>
> since the
default generic modemtype does not seem to work for you, you
> may need
to create a modems group (group = modems) entry for your
> specific
siemens model, filling in the appropriate config variables
> (like
enable-hwhs, init-string, etc) based on the documentation from
> your
model modem. take a look at the comments at the beginning of the
>
modems.conf file for the various config variable available. also
the
> other siemens modemtypes may give you some clues as to what you
need to
> configure.
>
> nick
>
>
> On
Wed, 2004-01-21 at 11:28, Aftab Rashid wrote:
> > Dear Nick,
>
>
> > First of all it says modemtype not found revert to
autodetect, but I
> > have specified siemens, secondly it goes into
loop
> >
> > following are the messages, a detailed error
log is attached to this
> email.
> > 2004-01-21 15:13:01 [6]
INFO: AT2[/dev/ttyS0]: opening device
> > 2004-01-21 15:13:01 [6]
INFO: AT2[/dev/ttyS0]: speed set to 9600
> > 2004-01-21 15:13:01 [0]
INFO: MAIN: Start-up done, entering mainloop
> > 2004-01-21 15:13:03
[6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported
> > 2004-01-21
15:13:03 [6] INFO: AT2[/dev/ttyS0]: closing device
> > 2004-01-21
15:13:03 [6] INFO: AT2[/dev/ttyS0]: opening device
> > 2004-01-21
15:13:03 [6] INFO: AT2[/dev/ttyS0]: init device
> > 2004-01-21
15:13:03 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600
> > 2004-01-21
15:13:04 [6] INFO: AT2[/dev/ttyS0]: cannot enable hardware
> >
handshake
> > 2004-01-21 15:13:04 [6] INFO: AT2[/dev/ttyS0]: Phase 2+
is supported
> > 2004-01-21 15:13:05 [6] ERROR: AT2[/dev/ttyS0]:
Opening failed.
> Terminating
> > 2004-01-21 15:13:05 [6] INFO:
AT2[/dev/ttyS0]: opening device
> > 2004-01-21 15:13:05 [6] INFO:
AT2[/dev/ttyS0]: init device
> >
> >
> > Please
suggest changes,
> >
> >
> > Regards,
>
>
> > Aftab
> >
> >
> >
-----Original Message-----
> > From: Nicholas Rahn <[EMAIL PROTECTED]>
>
> To: Aftab Rashid <[EMAIL PROTECTED]>
> >
Cc: [EMAIL PROTECTED]
> > Date: Wed, 21
Jan 2004 10:56:04 +0100
> > Subject: Re: Siemens Modem
SMSC
> >
> > > i don't see any error in this
log. normally, however, you should
> have
> > >
one more line that says "AT SMSC successfully opened." then you
>
know
> > > that everything is ok and you can start using
it.
> > >
> > > nick
> >
>
> > >
> > > On Wed, 2004-01-21 at
10:56, Aftab Rashid wrote:
> > > > Hi Nick,
>
> > >
> > > > I tried it and got the
following error:
> > > >
> > > >
2004-01-21 14:47:59 [0] INFO: AT2[/dev/ttyS0]: configuration
>
shows
> > > > modemtype <siemens>
>
> > > 2004-01-21 14:47:59 [0] INFO: AT2[/dev/ttyS0]: modemtype
not
> found,
> > > revert
> > > >
to autodetect
> > > > 2004-01-21 14:47:59 [0]
INFO:
> > > ----------------------------------------
>
> > > 2004-01-21 14:47:59 [0] INFO: Kannel bearerbox II
version
> > > cvs-20031218
> > > >
starting
> > > > 2004-01-21 14:47:59 [0] INFO: MAIN:
Start-up done, entering
> mainloop
> > > >
2004-01-21 14:47:59 [6] INFO: AT2[/dev/ttyS0]: opening device
>
> > > 2004-01-21 14:47:59 [6] INFO: AT2[/dev/ttyS0]: speed set
to 9600
> > > > 2004-01-21 14:48:01 [6] INFO:
AT2[/dev/ttyS0]: Phase 2+ is
> supported
> > > >
2004-01-21 14:48:01 [6] INFO: AT2[/dev/ttyS0]: closing device
>
> > > 2004-01-21 14:48:01 [6] INFO: AT2[/dev/ttyS0]: opening
device
> > > > 2004-01-21 14:48:01 [6] INFO:
AT2[/dev/ttyS0]: init device
> > > > 2004-01-21 14:48:01
[6] INFO: AT2[/dev/ttyS0]: speed set to 9600
> > > >
2004-01-21 14:48:02 [6] INFO: AT2[/dev/ttyS0]: cannot enable
>
hardware
> > > > handshake
> > > >
2004-01-21 14:48:02 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is
>
supported
> > > >
> > > >
>
> > > Regards,
> > > >
> >
> >
> > > > Aftab
> > >
>
> > > >
> > > >
>
> > >
> > > > -----Original
Message-----
> > > > From: Nicholas Rahn <[EMAIL PROTECTED]>
>
> > > To: Aftab Rashid <[EMAIL PROTECTED]>
>
> > > Cc: [EMAIL PROTECTED]
> > >
> Date: Wed, 21 Jan 2004 10:10:50 +0100
> > > >
Subject: Re: Siemens Modem SMSC
> > > >
>
> > > > you need to include the definition of your
modem in the
> > > configuration
> > >
> > file. the easiest way to do this is by adding this line
to
> your
> > > > > configuration
file:
> > > > >
> > >
> > include =
<path-to-kannel-source>/doc/examples/modems.conf
> > >
> >
> > > > > this will include the
standard modem configurations provided
> by
> > >
kannel
> > > > > and should allow you to use
your modem right away.
> > > > >
>
> > > > nick
> > > >
>
> > > > >
> > >
> > On Wed, 2004-01-21 at 09:01, Aftab Rashid wrote:
>
> > > > > Hi,
> > > >
> >
> > > > > > I want to use
SIEMENS M55 as SMSC. I'm getting the
> following
>
> > > > message
> > > >
> >
> > > > > > 2004-01-20
20:00:51 [0] INFO: HTTP: Opening server at port
> > >
1812.
> > > > > > 2004-01-20 20:00:51
[0] INFO: AT2[/dev/ttyS0]:
> configuration
> > > shows
> > > > > > modemtype
<siemens>
> > > > > > 2004-01-20
20:00:51 [0] PANIC: Where are the modem
> definitions
> >
> ?!?!
> > > > > > 2004-01-20
20:00:51 [0] PANIC: ./bearerbox [0x80a9be9]
> > > >
> > 2004-01-20 20:00:51 [0] PANIC: ./bearerbox [0x805d1a2]
>
> > > > >
> > > > >
> and my conf file is
> > > > >
> group = smsc
> > > > > >
smsc = at
> > > > > > modemtype =
siemens
> > > > > > device =
/dev/ttyS0
> > > > > >
> >
> > > >
> > > > > >
Is my mobile compatible with Kannel? If yes, what changes
>
should
> > > be
> > > > >
made
> > > > > > in the conf file to make it
working.
> > > > > >
> > >
> > >
> > > > > > Thanks and
regards,
> > > > > >
> > >
> > >
> > > > > >
Aftab
|
