In that case, you must declare "transceiver-mode" variable to "true". Omit "receive-port" variable.
Check the userguide, under SMPP 3.4 section. Regards. On 8/29/07, lekkie omotayo <[EMAIL PROTECTED]> wrote: > Thanks for quick response. > > Yes, they have transceiver. > > If the operator has a transceiver connection, how can I can get the inbound > messages from my operator? > How to I set up the config? > > What if my operator only supports transmitter/Receiver connection? > > Kind regards, > > Lekkie > > > On 8/29/07, Rodrigo Cremaschi <[EMAIL PROTECTED]> wrote: > > > Could this be because of the kannel version I am using (1.4.1)? > > No > > > > > Is it possible to receive SMS on SMPP connection? > > Yes, that's what Kannel is for. > > > > Are you sure your operator needs 2 connetcions Tx and Rx? Or is it a > > transceiver? > > > > On 8/29/07, lekkie <[EMAIL PROTECTED] > wrote: > > > > > > Hi guys, > > > > > > I am trying to connect kannel to my mobile operator through an SMPP > > > connection. > > > > > > However, my kannel box seem not to be listening on the receiver port I > > > specified. It ws able to connect to my operator on the transmitter port, > but > > > it never listen on the specified receive-port. > > > > > > With some googling, I found out, I can only get a receiver connection by > > > creating two separate SMSC configs using one as a transmitter the other > as a > > > receiver. I was advised to set transceiver mode to "no", set the > > > receive-port option to 0 (set transmit port) if I want to transmit and > set > > > transmit port to 0 if I want to receive (set receive port to 2001). When > I > > > did this, the log file told me I had a receiver bind however, kannel > > > connects to the operator's SMSC on the receiver port even though > transmitter > > > port is set to 0. > > > > > > > > > However, when I tried setting both port to same port, I ended up having > two > > > connections to SMSC both connection to the operator's port while source > port > > > was not open > > > > > > However, when I tried setting both port to diff port, I ended up having > one > > > connection to SMSC. > > > > > > I am afraid my config file may be wrong. > > > > > > Is there a way I can do this. > > > > > > Do I need 1 smsc config to achieve both transmitter and receiver > connection? > > > Do I need 1 smsbox config to achieve both transmitter and receiver > > > connection? > > > > > > Could this be because of the kannel version I am using ( 1.4.1)? > > > > > > Is it possible to receive SMS on SMPP connection? > > > > > > Thanks. > > > > > > > > > -- > > > View this message in context: > http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12394561 > > > Sent from the Kannel - User mailing list archive at Nabble.com. > > > > > > > > > > > > >
