Hi, Below is my config file.
However, what'd like is a single HTTP connection to an application to send and receive SMS from the application I'd also like 3 links to 3 telcos over SMPP binding as transceivers, so that they can receive and send messages. How can I make sure a message coming from a telco SMSC link will be forwarded to another SMSC or to a URL. I also want to be able to receive message from this application and forward it to an SMSC. (This I can do my specifying the user) Thanks. group = core admin-port = 13000 smsbox-port = 13001 admin-password = password #status-password = password admin-allow-ip = 127.0.0.1 log-file = "/var/smsgateway/log/kannel.log" log-level = 0 box-deny-ip = "*.*.*.*" box-allow-ip = 127.0.0.1 unified-prefix = "+234,0" access-log = "/var/smsgateway/log/access.log" #store-file = "/var/smsgateway/kannel/kannel.store" group = smsc smsc = smpp host = [telco-ip] port = [telco-port] receive-port = [same-port-as-above] transceiver-mode = true smsc-id = TelcoSmppLink smsc-username = uname smsc-password = pword system-type = [system-type] service-type = smpp allowed-prefix = +234803;+234806;+234703;0803;0806;0703 denied-prefix = * unified-prefix = "+234,0,234" log-file = "/var/smsgateway/log/kannel.log" log-level = 0 address-range = 0 connect-allow-ip = "127.0.0.1;[telco-ip]" # SMSC Link to send SMS to app group = smsc smsc = http port = 0 smsc-id = HttpLinkToApp system-type = kannel smsc-username = http smsc-password = http send-url = "http://[app-server-ip]/app/smexpress?smsvendor=kannel&from=%P&to=%p&text=%b&id=%I"; allowed-prefix = "+234803;+234806;+234703;0803;0806;0703;+234805;+234807;0805;0807;+234802;+234808;0802;0808" denied-prefix = * preferred-smsc-id = HttpLinkToApp unified-prefix = "+234,0,234" log-file = "/var/smsgateway/log/kannel.log" log-level = 0 address-range = 0 connect-allow-ip = "127.0.0.1" # SMSC Link to receive SMS from app group = smsc smsc = http port = 8080 smsc-id = HttpLinkFromPayphone system-type = kannel smsc-username = http smsc-password = http send-url = "http://localhost:13013/cgi-bin/sendsms?username=telco&password=telco&from=AppName&to=%p&text=%b"; allowed-prefix = "+234803;+234806;+234703;0803;0806;0703" denied-prefix = * preferred-smsc-id = HttpLinkFromApp unified-prefix = "+234,0,234" log-file = "/var/smsgateway/log/kannel.log" log-level = 0 address-range = 0 connect-allow-ip = "127.0.0.1;[app-server-ip]" group = smsbox smsbox-id = LinktoTelcoSMSBox bearerbox-host = "127.0.0.1" sendsms-port = 13013 global-sender = "App" #sendsms-chars = "0123456789 +-" log-file = "/var/smsgateway/log/smsbox.log" log-level = 0 access-log = "/var/smsgateway/log/access.log" group = smsbox smsbox-id = LinktoAppNameSMSBox bearerbox-host = "172.16.10.249" sendsms-port = 13013 global-sender = "App" #sendsms-chars = "0123456789 +-" log-file = "/var/smsgateway/log/smsbox.log" log-level = 0 access-log = "/var/smsgateway/log/access.log group = smsbox-route smsbox-id = LinktoTelcoSMSBox smsc-ids = TelcoSmppLink # SEND-SMS USERS group = sendsms-user username = mtn password = mtn forced-smsc = TelcoSmppLink allowed-prefix = "+234803;+234806;+234703;0803;0806;0703" #user-deny-ip = "" #user-allow-ip = "" # SEND-SMS USERS group = sendsms-user username = appname password = appname forced-smsc = SmscToApp allowed-prefix = "+234803;+234806;+234703;0803;0806;0703;+234805;+234807;0805;0807;+234802;+234808;0802;0808" #user-deny-ip = "" #user-allow-ip = "" Rodrigo Cremaschi wrote: > > Hi Lekkie, > > Tell us what have you done so far, and what problems have you > encountered. If you talked to the the carrier guys, what did they say? > So we can find out if Kannel, or the connection, or the SMSC has any > kind of problem. > > Regards, > Rodrigo. > > On 8/31/07, lekkie <[EMAIL PROTECTED]> wrote: >> >> How do I route incoming messages from SMPP Link? >> >> >> Rodrigo Cremaschi wrote: >> > >> > In that case, you must declare "transceiver-mode" variable to "true". >> > Omit "receive-port" variable. >> > >> > Check the userguide, under SMPP 3.4 section. >> > >> > Regards. >> > >> > On 8/29/07, lekkie omotayo <[EMAIL PROTECTED]> wrote: >> >> Thanks for quick response. >> >> >> >> Yes, they have transceiver. >> >> >> >> If the operator has a transceiver connection, how can I can get the >> >> inbound >> >> messages from my operator? >> >> How to I set up the config? >> >> >> >> What if my operator only supports transmitter/Receiver connection? >> >> >> >> Kind regards, >> >> >> >> Lekkie >> >> >> >> >> >> On 8/29/07, Rodrigo Cremaschi <[EMAIL PROTECTED]> wrote: >> >> > > Could this be because of the kannel version I am using (1.4.1)? >> >> > No >> >> > >> >> > > Is it possible to receive SMS on SMPP connection? >> >> > Yes, that's what Kannel is for. >> >> > >> >> > Are you sure your operator needs 2 connetcions Tx and Rx? Or is it a >> >> > transceiver? >> >> > >> >> > On 8/29/07, lekkie <[EMAIL PROTECTED] > wrote: >> >> > > >> >> > > Hi guys, >> >> > > >> >> > > I am trying to connect kannel to my mobile operator through an >> SMPP >> >> > > connection. >> >> > > >> >> > > However, my kannel box seem not to be listening on the receiver >> port >> >> I >> >> > > specified. It ws able to connect to my operator on the transmitter >> >> port, >> >> but >> >> > > it never listen on the specified receive-port. >> >> > > >> >> > > With some googling, I found out, I can only get a receiver >> connection >> >> by >> >> > > creating two separate SMSC configs using one as a transmitter the >> >> other >> >> as a >> >> > > receiver. I was advised to set transceiver mode to "no", set the >> >> > > receive-port option to 0 (set transmit port) if I want to transmit >> >> and >> >> set >> >> > > transmit port to 0 if I want to receive (set receive port to >> 2001). >> >> When >> >> I >> >> > > did this, the log file told me I had a receiver bind however, >> kannel >> >> > > connects to the operator's SMSC on the receiver port even though >> >> transmitter >> >> > > port is set to 0. >> >> > > >> >> > > >> >> > > However, when I tried setting both port to same port, I ended up >> >> having >> >> two >> >> > > connections to SMSC both connection to the operator's port while >> >> source >> >> port >> >> > > was not open >> >> > > >> >> > > However, when I tried setting both port to diff port, I ended up >> >> having >> >> one >> >> > > connection to SMSC. >> >> > > >> >> > > I am afraid my config file may be wrong. >> >> > > >> >> > > Is there a way I can do this. >> >> > > >> >> > > Do I need 1 smsc config to achieve both transmitter and receiver >> >> connection? >> >> > > Do I need 1 smsbox config to achieve both transmitter and receiver >> >> > > connection? >> >> > > >> >> > > Could this be because of the kannel version I am using ( 1.4.1)? >> >> > > >> >> > > Is it possible to receive SMS on SMPP connection? >> >> > > >> >> > > Thanks. >> >> > > >> >> > > >> >> > > -- >> >> > > View this message in context: >> >> >> http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12394561 >> >> > > Sent from the Kannel - User mailing list archive at Nabble.com. >> >> > > >> >> > > >> >> > > >> >> > >> >> >> >> >> > >> > >> > >> >> -- >> View this message in context: >> http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12426727 >> Sent from the Kannel - User mailing list archive at Nabble.com. >> >> >> > > > -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12427657 Sent from the Kannel - User mailing list archive at Nabble.com.
