I see nothing wrong here. All configuration seems good. You are using a 2 year
old gateway, though. That's what you get for working with binaries...
This doesn't seem as the same logfile, though. As Alvaro suggested, which log
file listed the error?
BR,
Nikos
----- Original Message -----
From: Drew Stockler
To: users@kannel.org ; Alvaro Cornejo ; Nikos Balkanas
Sent: Wednesday, January 07, 2009 11:07 PM
Subject: Re: Ubuntu Installation with DLR mysql
Version 1.4.1-2
here is the first 100 lines at start up
2009-01-07 14:57:48 [29955] [0] INFO: Added logfile
`/var/log/kannel/bearerbox.txt' with level `0'.
2009-01-07 14:57:48 [29955] [0] INFO: HTTP: Opening server at port
13000.
2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 1
(gwlib/fdset.c:poller)
2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 2
(gwlib/http.c:server_thread)
2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 3
(gw/bb_http.c:httpadmin_run)
2009-01-07 14:57:48 [29955] [0] DEBUG: starting smsbox connection module
2009-01-07 14:57:48 [29955] [0] INFO: BOXC: 'smsbox-max-pending' not
set, using default (100).
2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 4
(gw/bb_boxc.c:sms_to_smsboxes)
2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 5
(gw/bb_boxc.c:smsboxc_run)
2009-01-07 14:57:48 [29955] [0] INFO: Set SMS resend frequency to 60
seconds.
2009-01-07 14:57:48 [29955] [0] INFO: SMS resend retry set to unlimited.
2009-01-07 14:57:48 [29955] [0] INFO: DLR rerouting for smsc id
<(null)> disabled.
2009-01-07 14:57:48 [29955] [0] INFO: AT2[/dev/ttyS0]: configuration
doesn't show modemtype. will autodetect
2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 6
(gw/smsc/smsc_at.c:at2_device_thread)
2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 7
(gw/bb_smscconn.c:sms_router)
2009-01-07 14:57:48 [29955] [0] DEBUG: starting UDP sender/receiver
module
2009-01-07 14:57:48 [29955] [0] INFO: Adding interface *
2009-01-07 14:57:48 [29955] [0] DEBUG: udpc_create: Bound to UDP
<0.0.0.0:9200>
2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 8
(gw/bb_udp.c:udp_receiver)
2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 9
(gw/bb_udp.c:udp_sender)
2009-01-07 14:57:48 [29955] [0] DEBUG: udpc_create: Bound to UDP
<0.0.0.0:9201>
2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 10
(gw/bb_udp.c:udp_receiver)
2009-01-07 14:57:48 [29955] [3] DEBUG: Thread 3
(gw/bb_http.c:httpadmin_run) maps to pid 29955.
2009-01-07 14:57:48 [29955] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller)
maps to pid 29955.
2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 11
(gw/bb_udp.c:udp_sender)
2009-01-07 14:57:48 [29955] [0] DEBUG: starting wapbox connection module
2009-01-07 14:57:48 [29955] [0] ERROR: Missing wapbox-port variable,
cannot start WAP
2009-01-07 14:57:48 [29955] [0] DEBUG: starting WDP router
2009-01-07 14:57:48 [29955] [0] DEBUG: Started thread 12
(gw/bearerbox.c:wdp_router)
2009-01-07 14:57:48 [29955] [0] INFO:
----------------------------------------
2009-01-07 14:57:48 [29955] [0] INFO: Kannel bearerbox II version 1.4.1
starting
2009-01-07 14:57:48 [29955] [4] DEBUG: Thread 4
(gw/bb_boxc.c:sms_to_smsboxes) maps to pid 29955.
2009-01-07 14:57:48 [29955] [5] DEBUG: Thread 5
(gw/bb_boxc.c:smsboxc_run) maps to pid 29955.
2009-01-07 14:57:48 [29955] [6] DEBUG: Thread 6
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 29955.
2009-01-07 14:57:48 [29955] [6] DEBUG: AT2[/dev/ttyS0]: detecting modem
speed.
2009-01-07 14:57:48 [29955] [6] INFO: AT2[/dev/ttyS0]: opening device
2009-01-07 14:57:48 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened
2009-01-07 14:57:48 [29955] [2] DEBUG: Thread 2
(gwlib/http.c:server_thread) maps to pid 29955.
2009-01-07 14:57:48 [29955] [7] DEBUG: Thread 7
(gw/bb_smscconn.c:sms_router) maps to pid 29955.
2009-01-07 14:57:48 [29955] [7] DEBUG: sms_router: time to sleep 30.00
secs.
2009-01-07 14:57:48 [29955] [8] DEBUG: Thread 8
(gw/bb_udp.c:udp_receiver) maps to pid 29955.
2009-01-07 14:57:48 [29955] [9] DEBUG: Thread 9
(gw/bb_udp.c:udp_sender) maps to pid 29955.
2009-01-07 14:57:48 [29955] [10] DEBUG: Thread 10
(gw/bb_udp.c:udp_receiver) maps to pid 29955.
2009-01-07 14:57:48 [29955] [11] DEBUG: Thread 11
(gw/bb_udp.c:udp_sender) maps to pid 29955.
2009-01-07 14:57:48 [29955] [12] DEBUG: Thread 12
(gw/bearerbox.c:wdp_router) maps to pid 29955.
2009-01-07 14:57:48 [29955] [12] DEBUG: udp_die: removing producers
from udp-lists
2009-01-07 14:57:48 [29955] [12] DEBUG: Thread 12
(gw/bearerbox.c:wdp_router) terminates.
2009-01-07 14:57:48 [29955] [0] INFO: MAIN: Start-up done, entering
mainloop
2009-01-07 14:57:48 [29955] [0] DEBUG: AT2[/dev/ttyS0]: start called
2009-01-07 14:57:48 [29955] [7] DEBUG: sms_router: gwlist_len = 0
2009-01-07 14:57:49 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened
2009-01-07 14:57:49 [29955] [6] INFO: AT2[/dev/ttyS0]: speed set to
115200
2009-01-07 14:57:49 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> ^M
2009-01-07 14:57:49 [29955] [5] INFO: Client connected from <127.0.0.1>
2009-01-07 14:57:49 [29955] [5] DEBUG: Started thread 13
(gw/bb_boxc.c:function)
2009-01-07 14:57:49 [29955] [13] DEBUG: Thread 13
(gw/bb_boxc.c:function) maps to pid 29955.
2009-01-07 14:57:49 [29955] [13] DEBUG: Started thread 14
(gw/bb_boxc.c:boxc_sender)
2009-01-07 14:57:49 [29955] [14] DEBUG: Thread 14
(gw/bb_boxc.c:boxc_sender) maps to pid 29955.
2009-01-07 14:57:51 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2009-01-07 14:57:55 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2009-01-07 14:57:59 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2009-01-07 14:58:03 [29955] [6] INFO: AT2[/dev/ttyS0]: closing device
2009-01-07 14:58:03 [29955] [6] INFO: AT2[/dev/ttyS0]: opening device
2009-01-07 14:58:03 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened
2009-01-07 14:58:04 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened
2009-01-07 14:58:04 [29955] [6] INFO: AT2[/dev/ttyS0]: speed set to
57600
2009-01-07 14:58:04 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> ^M
2009-01-07 14:58:06 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2009-01-07 14:58:10 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2009-01-07 14:58:14 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2009-01-07 14:58:18 [29955] [6] INFO: AT2[/dev/ttyS0]: closing device
2009-01-07 14:58:18 [29955] [6] INFO: AT2[/dev/ttyS0]: opening device
2009-01-07 14:58:18 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened
2009-01-07 14:58:19 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened
2009-01-07 14:58:19 [29955] [6] INFO: AT2[/dev/ttyS0]: speed set to
38400
2009-01-07 14:58:19 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> ^M
2009-01-07 14:58:21 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2009-01-07 14:58:25 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2009-01-07 14:58:29 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2009-01-07 14:58:33 [29955] [6] INFO: AT2[/dev/ttyS0]: closing device
2009-01-07 14:58:33 [29955] [6] INFO: AT2[/dev/ttyS0]: opening device
2009-01-07 14:58:33 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened
2009-01-07 14:58:34 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened
2009-01-07 14:58:34 [29955] [6] INFO: AT2[/dev/ttyS0]: speed set to
19200
2009-01-07 14:58:34 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> ^M
2009-01-07 14:58:36 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2009-01-07 14:58:40 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2009-01-07 14:58:44 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2009-01-07 14:58:48 [29955] [6] INFO: AT2[/dev/ttyS0]: closing device
2009-01-07 14:58:48 [29955] [6] INFO: AT2[/dev/ttyS0]: opening device
2009-01-07 14:58:48 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened
2009-01-07 14:58:49 [29955] [6] DEBUG: AT2[/dev/ttyS0]: device opened
2009-01-07 14:58:49 [29955] [6] INFO: AT2[/dev/ttyS0]: speed set to 9600
2009-01-07 14:58:49 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> ^M
2009-01-07 14:58:51 [29955] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M
2009-01-07 14:58:51 [29955] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
2009-01-07 14:58:51 [29955] [6] INFO: AT2[/dev/ttyS0]: closing device
2009-01-07 14:58:51 [29955] [6] INFO: AT2[/dev/ttyS0]: detect speed is
9600
2009-01-07 14:58:51 [29955] [6] DEBUG: AT2[/dev/ttyS0]: detecting modem
type
2009-01-07 14:58:51 [29955] [6] INFO: AT2[/dev/ttyS0]: opening device
--- On Wed, 1/7/09, Nikos Balkanas <nbalka...@gmail.com> wrote:
From: Nikos Balkanas <nbalka...@gmail.com>
Subject: Re: Ubuntu Installation with DLR mysql
To: "Drew Stockler" <psustock1...@yahoo.com>, users@kannel.org,
"Alvaro Cornejo" <cornejo.alv...@gmail.com>
Date: Wednesday, January 7, 2009, 2:30 PM
This looks bad. It is complaining that it cannot find "group = core"
in the configuration file. Which clearly you do have. Furthermore it shouldn't
start if it didn't have a correct core group. Smells like memory corruption...
What version gateway are you using?
Could you send an excerpt from the bearerbox (100 or so lines) from
its startup?
BR,
Nikos
----- Original Message -----
From: Drew Stockler
To: users@kannel.org ; Alvaro Cornejo
Sent: Wednesday, January 07, 2009 9:42 PM
Subject: Re: Ubuntu Installation with DLR mysql
I get this:
2009-01-07 13:39:22 [27781] [0] INFO: Debug_lvl = -1,
log_file = <none>, log_lvl = 0
2009-01-07 13:39:23 [27781] [0] PANIC: DLR: can't find group
core
2009-01-07 13:39:23 [27781] [0] PANIC:
bearerbox(gw_panic+0x107) [0x80c5227]
2009-01-07 13:39:23 [27781] [0] PANIC:
bearerbox(dlr_init+0x1c8) [0x805ce48]
2009-01-07 13:39:23 [27781] [0] PANIC: bearerbox(main+0x10a)
[0x8052baa]
2009-01-07 13:39:23 [27781] [0] PANIC:
/lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe0) [0xb789b050]
2009-01-07 13:39:23 [27781] [0] PANIC: bearerbox [0x8051d51]
--- On Wed, 1/7/09, Alvaro Cornejo <cornejo.alv...@gmail.com>
wrote:
From: Alvaro Cornejo <cornejo.alv...@gmail.com>
Subject: Re: Ubuntu Installation with DLR mysql
To: "Drew Stockler" <psustock1...@yahoo.com>,
"users@kannel.org" <users@kannel.org>
Date: Wednesday, January 7, 2009, 12:54 PM
Please cc to kannel list so you can receive better support.the ./configure
make, make install is only needed when downloadingsources from kannel.otherwise
apt-get install is enoughtry bearerbox pathtoconfigfile to see if there are
errors whenrunning bearerbox and if it finds mysql
files|-----------------------------------------------------------------------------------------------------------------|Envνe
y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquiercelular y
Nextelen el Perϊ, Mιxico y en mas de 180 paises. Use aplicaciones 2 vias viaSMS
y GPRS online Visitenos en www.perusms.NET www.smsglobal.com.mx
ywww.pravcom.comOn Wed, Jan 7, 2009 at 1:15 PM, Drew Stockler
<psustock1...@yahoo.com>wrote:>
http://packages.ubuntu.com/hardy/i386/kannel/filelist>> According to ubuntu,
there
is no files called configure to run in the> directory in which kannel is
installed /etc/init.d/kannel>> On the page below it says that it is compiled
with ssl, mysql and native> malloc>>
http://packages.ubuntu.com/hardy/i386/kannel/filelist>> When you downloaded
kannel from the hardy repositories did you have to do> the configure; make;
install?>> The tables are set up and the config is below>> group = core>
admin-port = 13000> admin-password = bar> admin-deny-ip = ""> admin-allow-ip =
"127.0.0.1"> smsbox-port = 13003> wdp-interface-name = "*"> log-file =
"/var/log/kannel/bearerbox.txt"> log-level = 0> box-deny-ip = "*.*.*.*">
box-allow-ip = "127.0.0.1"> dlr-storage = mysql>>> group = smsc> smsc = at>
modemtype = auto> device =
/dev/ttyS0> my-number = 3124010078> sms-center = +13123149810>
connect-allow-ip = 127.0.0.1>>>> group = sms-service> keyword => keyword-regex
= .*> catch-all = yes> max-messages = 0> get-url =
"http://localhost/sms?phone=%p&text=%a";>> group = sendsms-user> username =
*****> password = *****> max-messages = 10> concatenation = true>> group =
smsbox> bearerbox-host = 127.0.0.1> sendsms-port = 13004> global-sender =
3124010078> log-file = "/var/log/kannel/smsbox.txt"> log-level = 0>> include=
"/usr/share/doc/kannel/examples/modems.conf">> group = mysql-connection> id =
mydlr> host = localhost> username = ***> password = ******> database = dlr>
max-connections = 1>> group = dlr-db> id =
mydlr> table = dlr> field-smsc = smsc> field-timestamp = ts> field-destination
= destination> field-source = source> field-service = service> field-url = url>
field-mask = mask> field-status = status> field-boxc-id = boxc>>>>>> --- On
Wed, 1/7/09, Alvaro Cornejo <cornejo.alv...@gmail.com> wrote:>> From: Alvaro
Cornejo <cornejo.alv...@gmail.com>> Subject: Re: Ubuntu Installation with DLR
mysql> To: "Drew Stockler" <psustock1...@yahoo.com>,"users@kannel.org">
<users@kannel.org>> Date: Wednesday, January 7, 2009, 9:30 AM>> Just run>>
(mysql must be installed before this)>> ./configure --with-mysql
--enable-start-stop-daemon>> on the dir where you downloaded kannel>> then
make>> and make
install (if you want to change default install dir doit
here>>>>>>|-----------------------------------------------------------------------------------------------------------------|>
Envνe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier>
celular y Nextel> en el> Perϊ, Mιxico y en mas de 180 paises. Use aplicaciones
2 vias via> SMS y GPRS online> Visitenos en www.perusms.NET
www.smsglobal.com.mx y> www.pravcom.com>>>> On Tue, Jan 6, 2009 at 9:04 PM,
Drew Stockler<psustock1...@yahoo.com>> wrote:>> I have the tables created
correctly. Here are my confige enterieswhich> are>> correct. The only thing I
am having trouble with is the make./configure> I>> don't understand the syntax
via the command line. Is there any>
documentation>> for that. i have searched the user guide, and google. I
see./configure> and>> type make all the time but when i put them into the
command line i get>> nothing.>>>> Thanks for all the help,>>>> Drew>>>> --- On
Tue, 1/6/09, Alvaro Cornejo <cornejo.alv...@gmail.com>wrote:>>>> From: Alvaro
Cornejo <cornejo.alv...@gmail.com>>> Subject: Re:> Ubuntu Installation with
DLR mysql>> To: "Drew Stockler" <psustock1...@yahoo.com>>> Cc:
users@kannel.org>> Date: Tuesday, January 6, 2009, 7:09 PM>>>> Just follow
indications on documentation about creation of dlr tables,>> make of kannel
with mysql support and the appropiate config entries.>>>> I use ubuntu hardy
with kannel & mysql from packages with
noproblem>>>> Regards>>>> Alvaro>>>>>> On Tue, 2009-01-06 at 16:41 -0800, Drew
Stockler wrote:>>> Is there anyone out there who installed kannel from the
ubuntu>>> repositories and successfully integrated kannel with mysql for>
dlr's?>>>>>> All the documenation i saw was for a downloaded install from>>>
kannel.org then do a ./configure make and include the mysqlcommands.>>>>>> Is
their a procedure for a debian install/ubuntu repository I> can>>>
follow?>>>>>> Thanks>>> Drew>>>>>>>>>>>>>>>>>>>>
